www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3] 4 5 ... 8  All

Author Topic: Stebel Mini Air Horn--stock location on a SEEG  (Read 39613 times)

0 Members and 1 Guest are viewing this topic.

jdracing

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • FLHRSEI.ORG
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #30 on: July 23, 2006, 04:22:49 PM »
That's a great story, Scrm-R.  This is a good, inexpensive mod that might save a life at some point.  Plus it's a whole lotta fun waking people up who drive with their brains in neutral.
Logged
Jeff
Fremont, CA

2005 Cherry SEEG, V&H Dresser Duals, Samson Rolled Thunder Mufflers, Ness Big Sucker, and Race Tuner

2005 Sierra Red/Silver Dyna Low Rider (Wife's ride), SE Tapered Mufflers, Ness Big Sucker, and Stage

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #31 on: July 23, 2006, 04:24:36 PM »
Did my air horn a while back and just got done with the horn cover.  Just wanted to get rid of the cow bell.  I used the airwing horn cover and added a timing cover to it for a little bling-bling factor.  Let's Roll
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #32 on: July 23, 2006, 04:25:54 PM »
and another..
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2

Garznhogs

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 711
  • $$$ heals all

    • CVO1: 2004 SEEG
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #33 on: July 23, 2006, 04:34:38 PM »
Quote
Did my air horn a while back and just got done with the horn cover.  Just wanted to get rid of the cow bell.  I used the airwing horn cover and added a timing cover to it for a little bling-bling factor.  Let's Roll
That looks GREAT!  Got more money in the cover than the horn, don'tcha?  :)

Garz
Logged
Ness Big Sucker, SuperTrapp 2:1, SERT, Dyno by Cycle-Rama = 107 hp, 108.5 tq. And that's all I need. Oh, wait... a working radio would be nice.

SCRM-R

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 734
  • It's Only $Money$...And I Can Make Some More!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #34 on: July 23, 2006, 04:35:05 PM »
Yep, that's a good lookin' horn cover.  Mine's not stock...it has flames sculpted out of it, with a burgundy wire mesh behind them, but it's still done using the stock cowbell...it matches my air cleaner cover.
Logged
2003 Screamin' Eagle Road King with Custom "Real Fire" Paint Scheme
Zipper's 117" Kit, Including:
   H-D Race Tuner
   Zippers 54MM Throttle Body
   RedShift 647 Cams
Diamond Cut Cylinders & Heads
Custom Engraved Front Lower Legs, Primary Inspection Cover & Saddlebag Latch Covers

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #35 on: July 23, 2006, 04:50:39 PM »
Quote
That looks GREAT!  Got more money in the cover than the horn, don'tcha?  :)

Garz
Let me think, yeap!, but isn't that how it goes.  I upgraded the horn but it still looked shiity and it was time for a change.  So out came the wallet and cha-ching $$, not bad compare to some of the mass produce covers I liked and it wasn't that hard to put together.  Let's Roll
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #36 on: July 23, 2006, 04:51:41 PM »
Quote
Yep, that's a good lookin' horn cover.  Mine's not stock...it has flames sculpted out of it, with a burgundy wire mesh behind them, but it's still done using the stock cowbell...it matches my air cleaner cover.

 [smiley=worthless.gif]

come on,  give us some more ideas
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50546
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #37 on: July 23, 2006, 04:55:32 PM »
Quote
Did my air horn a while back and just got done with the horn cover.  Just wanted to get rid of the cow bell.  I used the airwing horn cover and added a timing cover to it for a little bling-bling factor.  Let's Roll


That looks good Gabe.  Plenty of room to bury the horn and hide the air line too.  Really nice  [smiley=nixweiss.gif] .
Logged

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #38 on: July 23, 2006, 05:24:21 PM »
Quote


That looks good Gabe.  Plenty of room to bury the horn and hide the air line too.  Really nice  [smiley=nixweiss.gif] .
Don, it took me a while to get the cover that I liked, but got it done. Also I used 1/4" vacumm line, it was more user friendly.  Will see how it holds up as is not as tuff as fuel line.  So far so good.  Thanks for your help. Let's Roll
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2

SCRM-R

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 734
  • It's Only $Money$...And I Can Make Some More!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #39 on: July 23, 2006, 06:17:39 PM »
Quote

 [smiley=worthless.gif]

come on,  give us some more ideas
O.K., here's an idea for the horn cover
Logged
2003 Screamin' Eagle Road King with Custom "Real Fire" Paint Scheme
Zipper's 117" Kit, Including:
   H-D Race Tuner
   Zippers 54MM Throttle Body
   RedShift 647 Cams
Diamond Cut Cylinders & Heads
Custom Engraved Front Lower Legs, Primary Inspection Cover & Saddlebag Latch Covers

SCRM-R

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 734
  • It's Only $Money$...And I Can Make Some More!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #40 on: July 23, 2006, 06:18:47 PM »
Quote

 [smiley=worthless.gif]

come on,  give us some more ideas
And...a primary inspection cover...That's it, I'm all out of ideas.
Logged
2003 Screamin' Eagle Road King with Custom "Real Fire" Paint Scheme
Zipper's 117" Kit, Including:
   H-D Race Tuner
   Zippers 54MM Throttle Body
   RedShift 647 Cams
Diamond Cut Cylinders & Heads
Custom Engraved Front Lower Legs, Primary Inspection Cover & Saddlebag Latch Covers

Hogfn

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159
  • FINALLY!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #41 on: July 23, 2006, 06:30:57 PM »
Quote
And...a primary inspection cover...That's it, I'm all out of ideas.

Who did your inspection cover?  Looks nice!
Logged
2014 SE
2005 Cherry SE
SE Air Cleaner
PC III
Freedom Exhaust and Pipes

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32640
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #42 on: July 23, 2006, 06:46:34 PM »
Quote
Did my air horn a while back and just got done with the horn cover.  Just wanted to get rid of the cow bell.  I used the airwing horn cover and added a timing cover to it for a little bling-bling factor.  Let's Roll
Thanks for information. I have the same cover, and had wondered if this horn would work with modified install that is suggested here. On second thought should I be thanking you for providing more ways for me to spend money? Hell yea!!! ;D

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

SCRM-R

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 734
  • It's Only $Money$...And I Can Make Some More!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #43 on: July 23, 2006, 07:16:50 PM »
Quote

Who did your inspection cover?  Looks nice!
Thanks!...http://www.sanjoyengraving.comAlso, you can check out this thread for photos of more engraving that they did for me a while back.  http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1147641653
Logged
2003 Screamin' Eagle Road King with Custom "Real Fire" Paint Scheme
Zipper's 117" Kit, Including:
   H-D Race Tuner
   Zippers 54MM Throttle Body
   RedShift 647 Cams
Diamond Cut Cylinders & Heads
Custom Engraved Front Lower Legs, Primary Inspection Cover & Saddlebag Latch Covers

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: Stebel Mini Air Horn--stock location on a SEEG
« Reply #44 on: July 24, 2006, 09:39:16 PM »
Scrm-r, very cool.  I had seen a few die cut like that just never pulled the trigger.  I like the mesh insert, takes it to the next level.  Let's Roll
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2
Pages: 1 2 [3] 4 5 ... 8  All
« previous next »
 

Page created in 0.201 seconds with 21 queries.