Topic: Re: ECM DOWNLOADS (Read 2898 times)

WFP · « **on:** April 26, 2004, 01:43:50 PM »

I have an '03 SED, HD air kit, SED cams - which according to the parts book are 203s, and SE II slip fit? non-street pipes. I installed the air kit and the pipes myself, took the bike to the dealer and they flashed it with the Stage II ECM program...I don't have the part number.

I can't say I have pinging but I do have an issue when slowing down approach ing my garage for example. At about 1200 revs the engine bucks a little making it a little uncomfortable.

WFP · « **Reply #1 on:** April 26, 2004, 07:14:23 PM »

Thanks for the primary info!

My pipes are pn 80354-00 I don't think they have it anywhere ... the download is 32083-01.

I like the pipes except that the chome heatshield still has the piece where the crossover was...just hangin' there...no-one really notices but I do. As for sound 3/5 for loudness, maybe 3.5 but not close to the bark of an open pipe. They are perfect for me.

/Bill

WFP · « **Reply #2 on:** April 26, 2004, 07:54:32 PM »

No pinging that I can detect...but before I do another dealer download, I would probably just get the race tuner and have it dyno'd if I find one around me that is competent to tune these FI engines!

WFP · « **Reply #3 on:** April 27, 2004, 11:33:29 AM »

Post your results when you get it done...hopefully the weather is improving to get some riding in!

/Bill

WFP · « **Reply #4 on:** April 28, 2004, 10:38:50 AM »

Thanks for the update...keep looking for that competent EFI Dyno tuner...I am!

Author Topic: Re: ECM DOWNLOADS (Read 2898 times)