Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[09BlueRoadKing]

Just recently installed v&h big radius on the wifes 2011 convertable and was told by harley techs it didnt need a tuner, long story short took it to get dynoed with super pro tuner and was told on first stock run the rear cylinder was extremely lean, go figure. Anyway Ed (The dyno difference in dallas) recomended we install an oil cooler on the bike. It seems like harley should of done this from the factory as now all 103 motors on the baggers have them. Anyone install one on the convertable?? Pics?? By the way my name is Sonny, and I welcome you all to the forum

[Skillet]

Welcome to the site from South Korea. I am sure somebody will chime in soon with the info for you.

[MKW]

Just recently installed v&h big radius on the wifes 2011 convertable and was told by harley techs it didnt need a tuner, long story short took it to get dynoed with super pro tuner and was told on first stock run the rear cylinder was extremely lean, go figure. Anyway Ed (The dyno difference in dallas) recomended we install an oil cooler on the bike. It seems like harley should of done this from the factory as now all 103 motors on the baggers have them. Anyone install one on the convertable?? Pics?? By the way my name is Sonny, and I welcome you all to the forum

I hear good things about The Dyno Difference.  I looking to get up there for SATX sometime this spring. 

[Deep Blue Dives]

Ed worked magic with my bike - great guy!!!!   Don't think you could go wrong with adding an oil cooler if your bike didn't come standard with one.

[GregKhougaz]

 Maybe it is just me but is there some confusion here?  The 2011 CVO Convertible has both a 110" motor and an oil cooler from the factory.     April fools was yesterday,  So, what am I missing?   

[Mr. Warlock]

The Convertible does not have an oil cooler.

[Lever]

scroll thru my pics and you will see the oil cooler and fan kit i had installed

http://s209.photobucket.com/albums/bb296/Lever03/#

[Mr. Warlock]

Lever, have you been able to get any oil temp readings since your build with the oil cooler in place?

[T-Babe]

i had one put on my 2011
You can see it in this picture

[99fatboy]

This is the oil cooler I went with, at 90 degrees my oil tank temp stays around 180. I have 10.1 pistons so I wanted my gas to burn from the flame from the plugs and not cylinder temps!

http://www.skullmanonline.com/1004.html

[hadye]

I have to apologize for always reviving old threads, but every day I understand & know new things especially about air cooled engines. So now what is this issue about oil coolers. To give u an idea, am living in a place where the lower temperatures at 12 AM can reach ...... Well, I will leave the picture to express

Would I go with the one from the stealer or there is a more efficient one ?

[Mr. Warlock]

I think the MoCo cooler and the Jagg 1100 are the best for our bikes - just my opinion though. I am absolutely installiong one I just have to decide which one. I like the Harley one because it fits between the frame members and you can install the fans behind it. But, I think the Jagg cooler is a better cooler. If the Jagg cooler will fit between the frame members then I will prolly choose that one. My 10.8 CR even with a good tune has me hitting the rear cylinder shut down mode when sitting for just short periods of time.

http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448769781&FOLDER%3C%3Efolder_id=2534374302289343&ASSORTMENT%3C%3East_id=2534374302289343&bmUID=1338470751385&bmLocale=en_US

http://www.jagg.com/6-row-vertical-chrome.htm

[Lever]

Lever, have you been able to get any oil temp readings since your build with the oil cooler in place?

well i turn my fans on when my speed is below 45mph  when doing so my oil temp stays below 220 with air temp aprox mid 90's

[hadye]

i had one put on my 2011
You can see it in this picture

Does it come with 2 covers? Black & Chrome? Because on the website, the P/N 26157-11 says kit includes black cover

[hadye]

My 10.8 CR even with a good tune has me hitting the rear cylinder shut down mode when sitting for just short periods of time.

we have that in our bikes, don't we?

Sent from my iPad using Tapatalk HD