Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[halfcirclej]

   I don't know where to put this but here. Mine worked fine for about. 3 months.  I could not get it to work. I took the back off the china part an it had been on fire!  It is a wonder it didn't burn down my house! Has any one else had a problem with their door opener?

[Firewalker]

Only that it will not work. I have wired it every way suggested here. Have a 2012 door opener so the interface should be good... there is a 'gremlin' in there someplace.
With what you have found, I am not going to pull mine apart and look. Thanks...

[FLHTCUSE7]

Mine is working fine. Took me less than 5 minutes to install and pair, works perfect everytime.

[tlr]

X2. Never a problem. 2 bikes, same unit

[Boxman88]

X3 Lets go for 3 in a row. 5 min install and was already programmed on the bike. Works every time. Is China Chit but it works.

[Sklywag]

Not disagreeing with what you see but to meet UL approval for home use the unit is tested & certified not to catch fire.  Now I don't disagree that it may looked all burnt up, & that could be because it had something short out internally & burn up the circuit board, but without actually catching fire.  & yes there could be lots of smoke, proving that sometimes there is smoke without fire..

Don't ask how I know all this, too many years of product testing.

[wideglidejoe]

Plugged it in back in Aug '11, and it's worked flawlessly ever since.