Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Fullsac Performance]

Please do post any dyno runs with the new Sportpipe. 

Thanks
Glenn

I have a 2012 CVO coming in Thursday morning for a Stage I kit with the new Sportpipe. 

Steve George
Fullsac Performance

[HOGMIKE]

I have a 2012 CVO coming in Thursday morning for a Stage I kit with the new Sportpipe.  

Steve George
Fullsac Performance

I just helped a club member here install one Sunday on his 2012 103 with the  "canned map"......he says it is working great and we have no plans to do any V-tunes at this time.
Saturday is a long club ride and that will give the bike a chance to heat up and we'll see if it behaves.
Header went on like butter. He's not a wrench and is pretty proud of actually working on his own bike!
 

[Depdog]

Hopefully not too silly a question 

On the naked pipe Steve posted a pic of.  The end closest to the O2 Bungs, there is no skirt.  On the coated pipe in the picture on the above post on the bike, you can see a skirt welded on. 

What is the skirt for (I am guessing to mount the stock chrome covers???)

Thanks
Glenn

[Ghost__Rider]

Hopefully not too silly a question  

On the naked pipe Steve posted a pic of.  The end closest to the O2 Bungs, there is no skirt.  On the coated pipe in the picture on the above post on the bike, you can see a skirt welded on.  

What is the skirt for (I am guessing to mount the stock chrome covers???)

Thanks
Glenn

It is for the clamp of the heat shield, and helps the heat shield line up

[Fullsac Performance]

Good eye Glenn!

The naked pipe has yet to have the Heat shield mount welded on. I wanted to show the full length of the collector.
The shield mount is actually a piece of the original cat body. We try to build "Green" at Fullsac and not waste anything.

SG from FP

[Depdog]

Posted in another thread, just adding the gist here in case it's missed.

Does anyone have a comparison, or set of dyno runs on a Sportpipe Vrs the B Xpipe on a 103, stock with tune, or with a stage 1 kit?

Thanks
Glenn