Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[SHRK2TH]

Heres a photo of mine with the LED turnsignal from Custom Dynamics.  They turn amber when being used,
back to white.  Love the Daymakers at night!

[DesertHOG]

Heres a photo of mine with the LED turnsignal from Custom Dynamics.  They turn amber when being used,
back to white.  Love the Daymakers at night!

Very nice!

[Tallkid]

Thanks for whoever put this together. I just put in my daymakers and they look awesome. But I did find it a lot easier to put the fairing back on without the light in. Mostly so you can see the tabs that it rests on. And then unscrew the lights from the housing plate. There's 4 Phillips head screws for each light. And line up the adjusting bolts and make sure the green tabs get pressed in their right places. Then you can plugin the lights and put the screws back. This way makes it less frustrating.

[charles05663]

When I installed my DayMakers I adjusted them according to the service manual.  Is there any instructions on adjusting them?  I searched and could not find any information.

 

[GregKhougaz]

When I installed my DayMakers I adjusted them according to the service manual.  Is there any instructions on adjusting them?  I searched and could not find any information.

There were no additional instructions for adjustment in my box.  The adjustment is as in your service manual.

[Crusty]

great writeup Simon! Off to do mine now!

[Crusty]

great writeup Simon! Off to do mine now!

All right, I was good right up to the point it went downhill for everyone else... rehanging that damn outer fairing! I spent 30 minutes trying to get it lined up.
 Then I adapted the advice above, left the headlight assembly out and hung it in 4 seconds.  Reconnected the lights, played around a little to get the screws through the holes and the green clips popped in and it was good to go!

Getting the sides lined up in a pain in the ass, and I think it is time to replace my trim, as the sticky is all over everything BUT the inside of the trim... 

Just waiting for it to get dark so I can check them out!

[charles05663]

All right, I was good right up to the point it went downhill for everyone else... rehanging that damn outer fairing! I spent 30 minutes trying to get it lined up.
 Then I adapted the advice above, left the headlight assembly out and hung it in 4 seconds.  Reconnected the lights, played around a little to get the screws through the holes and the green clips popped in and it was good to go!

Getting the sides lined up in a pain in the ass, and I think it is time to replace my trim, as the sticky is all over everything BUT the inside of the trim... 

Just waiting for it to get dark so I can check them out!

Reminds me of my install. 

 

[BOHICA]

Where did you find Perewitz LED turn Signals for your Glide?