Topic: Handle bars for 2003 serk (Read 1039 times)

Stormer · « **on:** August 21, 2006, 09:04:00 AM »

My arms are too short and the new seat put me an inch further back it seems, would like to sit back a bit., im curled forward at the waist nowto reach,. Any suggestions for bars,? im not adverse to short apes, the heritage classic might work but will they fit in the clamps> any ideas, thanks.

The Mysterious Q! · « **Reply #1 on:** August 21, 2006, 09:24:53 PM »

I had to swap out my clamps on my ape swap because the brand of bars I chose only came in 1 inch at the clamp and stock is larger.I also went with a 1 pc clamp over the stock 2 pc version. (less flex) Later,Q

d-rock · « **Reply #2 on:** August 25, 2006, 12:12:12 PM »

Big D,
I've got to know how to make a frankenserk. [smiley=drink.gif]

The Mysterious Q! · « **Reply #3 on:** August 25, 2006, 04:49:11 PM »

Quote

Big D,
I've got to know how to make a frankenserk. [smiley=drink.gif]

Actually I changed my avatar and didn't change all of my tag line.My 02 SERK is nicknamed the FrankenSERK. [smiley=xyxthumbs.gif]Catch ya on the flip,Q

SPIDERMAN · « **Reply #4 on:** August 25, 2006, 05:21:30 PM »

There's a complete thread on this somewhere in the RK section. Should be labled Ape hangers or something to that effect. Do a search and check it out.

Big B

Mikey · « **Reply #5 on:** September 10, 2006, 11:19:56 PM »

I have the same problem. I just can't decide on 12" 14" or 16" Hate to do it twice.

Author Topic: Handle bars for 2003 serk (Read 1039 times)

Stormer

Handle bars for 2003 serk

The Mysterious Q!

Re: Handle bars for 2003 serk

d-rock

Re: Handle bars for 2003 serk

The Mysterious Q!

Re: Handle bars for 2003 serk

SPIDERMAN

Re: Handle bars for 2003 serk

Mikey

Re: Handle bars for 2003 serk