Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tpseabird]

They are definitely busy! I just ordered mine! DX, 2.25, sleeves , and TTS...can't wait! Hope it has a nice deep rumble.

Did the install yesterday. Very easy! The sound and performance is outstanding. I had D&D 's on my last bike and while I thought they sounded good, the deep rumble of the DX Pipe w/2.25 baffles sounds so much better! Not raspy at all. Just a good solid rumble that easily lays claim to the street. The throatiness and roar the bike now has when coming up to speed easily grabs everyone’s attention. Did I mention the power? Very happy! Definite improvement!

Thanks Steve! Fullsac rocks!

Semper Paratus!

Todd

[FLSTFI Dave]

you always will loss MPG when changing out headers and mufflers - more air in (high flow air cleaner) - more air out (exhaust) - uses more gas!!

I have not noticed that.  Seems my mpg stays about the same doing just exhaust, high flow air cleaner and tune.

Heck my mpg did not go down much adding cams, high comp pistons head work, bigger throttle body, bigger injectors.  On steady interstate looks like I did not loose but 1 mpg.  Now when I am using the new added power, it does go down more, but that is more a function of my wrist.

[bostonCVO]

My stage one with the DX pipe is on order as well!! For those of you that have installed this how hard was it to drill through the stock slip on and get it lined up to new baffle? How did you score the chrome to get the drill started? Did you use a regular punch?

Ordered the 2.0 baffles hope it not too quiet.

[tincup64]

My stage one with the DX pipe is on order as well!! For those of you that have installed this how hard was it to drill through the stock slip on and get it lined up to new baffle? How did you score the chrome to get the drill started? Did you use a regular punch?

Ordered the 2.0 baffles hope it not too quiet.

i did this about 7 minutes ago.  i measured three times each and put a small dot with black sharpee where i wanted to drill.  i then took my smallest wood punch and was very careful and used it a few times.  chrome only dents a little.  then used a 1/8 pilot hole - then straight to the 1/4".  worked great and very easy to drill.  wood drill only - didn't need a special bit.  hope this helps.

tin

[fastfreddy]

i used a die grinder, after measuring and marking i just touched with the die grinder(same one i used to grind the welds) & then drilled it . its a peice cake to do the install

[bostonCVO]

Thanks for the suggesttion looking forward to doing the install.