Topic: Will the nightmare ever end? (Read 3126 times)

twistedcherokee · « **Reply #15 on:** April 14, 2013, 04:18:25 PM »

Got the wires fixed, idle adjusted, belt & rear tire aligned. Took it for a road test. I changed the gearing, cams & went to Fulsac TD. Took it for a ride. It seems a little anemic @ 60mph in 5th but does great at 80mph. 4th @ 60 is not bad if it is hitting a head wind or a hill, but on the flats with no load it is great. Will take it to work tomorrow & put the gas analyzer on it to see how it is running.

Toby

timo482 · « **Reply #16 on:** April 15, 2013, 08:50:59 AM »

true dual or x pipe?

true dual is usually anemic at low rpm

to

twistedcherokee · « **Reply #17 on:** April 16, 2013, 12:42:34 AM »

True Duals. I rode it to work today & it ran great. For being geared a little taller it is not noticeable at all. It gets to 80mph with no effort. Easy to get going & just cruise. On the uphill grade going home with a healthy head wind, it did better than before. I went from SE 203's to the Andrews 37G's, I am pleased.

Toby

Author Topic: Will the nightmare ever end? (Read 3126 times)

twistedcherokee

Re: Will the nightmare ever end?

timo482

Re: Will the nightmare ever end?

twistedcherokee

Re: Will the nightmare ever end?