Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Tacho/spedo color change?  (Read 1073 times)

0 Members and 1 Guest are viewing this topic.

Elitetaiwan

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Tacho/spedo color change?
« on: April 30, 2013, 11:09:17 AM »

Hello all, I'm new breakout cvo owner from Taiwan

First of all, Im sorry for my poor English
I have searching for the information about changing the tacho colors
But didn't find anything

As I know, to change the tacho colors need to turn the switch into "ACC" position
But there isn't "ACC" position on my breakout
Need help, please!
Logged

RedMoon

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 233

    • CVO1: 2012 FLSTSE 3
    • CVO2: 2013 FXSBSE
Re: Tacho/spedo color change?
« Reply #1 on: April 30, 2013, 11:23:43 AM »

Hello all, I'm new breakout cvo owner from Taiwan

First of all, Im sorry for my poor English
I have searching for the information about changing the tacho colors
But didn't find anything

As I know, to change the tacho colors need to turn the switch into "ACC" position
But there isn't "ACC" position on my breakout
Need help, please!
Hi, please read this  Accessory Mode

With the security fob present, press and hold the TRIP switch. The instruments and accessory circuit will be powered. The headlamp and turn signal lamps will remain off. While in accessory mode, the instruments display the fuel gauge and odometer functions. The headlamp can be activated by pressing the headlamp flash to pass switch.

To turn the motorcycle back off, press and hold the TRIP switch.

Do not leave the motorcycle in accessory mode for an extended period of time. This can discharge the battery. If the vehicle is left in accessory mode for two hours, the vehicle will automatically shut off to prevent complete battery discharge. To resume accessory mode, press and hold the TRIP switch again.
Logged
 

Page created in 0.191 seconds with 22 queries.