Topic: Carlini Ape Bars (Read 4935 times)

gpopvet · « **on:** January 01, 2013, 04:25:38 PM »

Has anyone installed the Carlini Bars, I am considering and was looking for pictures, also can wires be concealed?

intensefab · « **Reply #1 on:** January 06, 2013, 05:45:54 PM »

Carlini Pist apes, they have to be internally wired.

redbeard719 · « **Reply #2 on:** January 09, 2013, 12:13:14 AM »

18" Carlini Gangster Apes - with the hydraulic clutch, you must stay at 1.25" diameter bars to clear the clutch master cylinder.

bjizel · « **Reply #3 on:** January 09, 2013, 12:19:19 AM »

Fish Eye,

Project seems to be coming along nice, keep us posted with the progress.

Bernell

Shark 6 · « **Reply #4 on:** April 20, 2013, 08:52:15 PM »

I got the Carlini Gangster Apes 1 yr later (15K miles), problems, wires starting to chafe, throwing error codes. Svc Tech says the holes are two small for all the internal wires associated with CVO's. Contacted Carlini, said they have no noted issues, asked about drilling holes bigger...their "soft" answer was to drill big enough to make the wires fit. Looking at replacing with Vindikta Bars, as drilling the holes bigger may change the integrity of the bars and make them unsafe...

2013SERG · « **Reply #5 on:** May 07, 2013, 01:40:32 AM »

Check these out from Bukybar
1 and a 1/2 inch and up to 20"

Author Topic: Carlini Ape Bars (Read 4935 times)

gpopvet

Carlini Ape Bars

intensefab

Re: Carlini Ape Bars

redbeard719

Re: Carlini Ape Bars

bjizel

Re: Carlini Ape Bars

Shark 6

Re: Carlini Ape Bars

2013SERG

Re: Carlini Ape Bars