Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[elvislee]

I am replaceing my stock drag bars with buckhorn handlebars. My stock brakeline end fitting will not reach the brake lever control handle near the front brake master cylinder. I am going to replace the stock line and need to know the following:

1. Does anyone know the hole size/diameter of the brakeline end fitting that goes up to the front brake lever? I was told it could be from 10 to 14mm in diameter. We have the lines to fit in length; just not sure of hole size.

My bike is 75 miles away in Mobile and I could drive over to check but thought some of you knowledgeable foks might know...Thanks...Blaine

[crshnbrn]

The banjo fitting at the top of the front brake line for an FXR4 is 10mm.

FXRs4evr [smiley=xyxthumbs.gif]