Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bigfoot16]

Okay gang, I need advice please. I need to put some mini apes on my bike, 10" or 12". I'm noticing the selection is limited. Can anyone recommend a brand or dealer or any advice?  Thanks

[9 1/2 Beers]

http://www.wild1inc.com/

 I hope this helps you.

[Bigfoot16]

http://www.wild1inc.com/

 I hope this helps you.

Thanks

[DerbyCityCVO]

Finally got my Wild One 578 bars put on yesterday. After trying to get several independent shops to do it, neither keeping appointment schedule, decided to do it myself with the help of a few friends. Took about 3 hours. I used the Namz NHCX-J12 wire extensions. They are true plug and play and made the job much easier.
Really like the way they feel. I'm 5' 10" and now feel like I'm sitting upright with my arms relaxed.

Sent from my SM-N900P using Tapatalk

[Bigfoot16]

What size and can you post pics?  Thanks

[DerbyCityCVO]

The 578's are 10". They come to the top edge for the fairing. There are pictures in this tread. I'll try to post pictures this evening. Dealer wanted $500 to install. If you can turn a wrench it's not hard to do. You need the help of a friend or two to hold parts out of the way.

Sent from my SM-N900P using Tapatalk

[9 1/2 Beers]

 

[Bigfoot16]

Okay, I'm still getting mixed information from my local shops.  Last year I put 12" bars on my CVO and was able to use my stock cables and wires.  I want to do the same on the new bike but have had a few people say I need new cables and a few say they are the same as last year and will not need new ones.  Can anyone help with this?  Thanks

[DerbyCityCVO]

I did not put cables on my 14 CVO. I did get the Namz wire extensions ($35) to make it easier. I cut the 2 zip ties off the cables to give them room to move. No tightness or binding.

Sent from my SM-N900P using Tapatalk

[Bigfoot16]

I did not put cables on my 14 CVO. I did get the Namz wire extensions ($35) to make it easier. I cut the 2 zip ties off the cables to give them room to move. No tightness or binding.

Sent from my SM-N900P using Tapatalk

Thanks for the reply. What size bars did you install?  Thanks

[Jbbrown73]

I have the 578s on a Street Glide and I love them!  I was able to utilize stock brake and electronics, but I had to get a longer clutch cable.  I went with a 4" over stock, and it was perfect.  This was on a non-cvo, so it was a cable, not hydraulic clutch.

[Bigfoot16]

Thanks JB

[CVOjunkie]

i have the 577 and and i am 5'9' and love them a easy fit with no problems call hill country customs and get these bars with all the stuff and its a no brainer!!!!!! just enjoy

[DerbyCityCVO]

See picture above,  WO578 are listed as 10".

[DerbyCityCVO]

More pictures of WO/578