www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: SE air cleaner backing plate?  (Read 1247 times)

0 Members and 1 Guest are viewing this topic.

Jordan1200

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 97
  • www.CVOHARLEY.com
    • ON

SE air cleaner backing plate?
« on: January 18, 2020, 06:55:43 AM »
Do you know if it will fit 2010 FL touring models? I know there is an SE backing plate that does fit 29624-08 accordingly the Moco, I have that one (not chrome).
I want to use the style below to allow me to re-route the air breather tubes externally.

https://accessories.harley-davidson.ca/product/29586-06/screamin-eagle-air-cleaner-back-plate-kits

Sent from my SM-G960W using Tapatalk

Logged
2010 Street Glide 96" (Canadian edition)
S&S 106 Big Bore
Stage 2 ACR Heads
Fueling Oil Pump
Fueling Cam plate and
Fueling 543 Gear Drive cams
Supertrapp Supermeg 2 into 1 Exhaust

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: SE air cleaner backing plate?
« Reply #1 on: January 18, 2020, 09:33:19 AM »
I would like to see a photo of what you have now. It is very possible to adapt the breathers to most of the backing plates.
Logged

Jordan1200

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 97
  • www.CVOHARLEY.com
    • ON

Re: SE air cleaner backing plate?
« Reply #2 on: January 18, 2020, 10:23:21 AM »
Quote from: HD Street Performance on January 18, 2020, 09:33:19 AM
I would like to see a photo of what you have now. It is very possible to adapt the breathers to most of the backing plates.
Same as this one

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F182542015348

I know there are mods that can be done like from DK customs.
It is much easier to just re-route the breather tubes.

http://www.dkcustomproducts.com/acl/diy-external-breather-system.htm


Sent from my SM-G960W using Tapatalk

Logged
2010 Street Glide 96" (Canadian edition)
S&S 106 Big Bore
Stage 2 ACR Heads
Fueling Oil Pump
Fueling Cam plate and
Fueling 543 Gear Drive cams
Supertrapp Supermeg 2 into 1 Exhaust

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: SE air cleaner backing plate?
« Reply #3 on: January 18, 2020, 10:31:42 AM »
Your call, his method works. I would recommend no air filter on the end and just black fuel hose is sufficient. It can be hidden and then go into a catch can. JAZ 605-375-01 is one, it can be hidden.
Logged

Jordan1200

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 97
  • www.CVOHARLEY.com
    • ON

Re: SE air cleaner backing plate?
« Reply #4 on: January 18, 2020, 10:43:49 AM »
Quote from: HD Street Performance on January 18, 2020, 10:31:42 AM
Your call, his method works. I would recommend no air filter on the end and just black fuel hose is sufficient. It can be hidden and then go into a catch can. JAZ 605-375-01 is one, it can be hidden.
I have two catch cans. I want one for each side to be able to see how much each side is venting.
These ones
http://www.dkcustomproducts.com/4-stage-black-catch-can-for-external-breather-system-ebs-harley-2094.htm

Sent from my SM-G960W using Tapatalk

Logged
2010 Street Glide 96" (Canadian edition)
S&S 106 Big Bore
Stage 2 ACR Heads
Fueling Oil Pump
Fueling Cam plate and
Fueling 543 Gear Drive cams
Supertrapp Supermeg 2 into 1 Exhaust

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: SE air cleaner backing plate?
« Reply #5 on: January 18, 2020, 10:58:29 AM »
If you are getting any more than vapor in those then you have bigger issues.
Logged

Jordan1200

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 97
  • www.CVOHARLEY.com
    • ON

Re: SE air cleaner backing plate?
« Reply #6 on: January 18, 2020, 11:10:37 AM »
Quote from: HD Street Performance on January 18, 2020, 10:58:29 AM
If you are getting any more than vapor in those then you have bigger issues.
When I had external breathers on my evo I would get condensation when the bike was started in very cold weather.

I was wondering what would be a better approach to plugging the breather holes if I use my existing plate.
The RTV in the previous link or this method of drilling,tapping and plugging. See below a DK customes video.



Sent from my SM-G960W using Tapatalk

Logged
2010 Street Glide 96" (Canadian edition)
S&S 106 Big Bore
Stage 2 ACR Heads
Fueling Oil Pump
Fueling Cam plate and
Fueling 543 Gear Drive cams
Supertrapp Supermeg 2 into 1 Exhaust

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: SE air cleaner backing plate?
« Reply #7 on: January 18, 2020, 11:21:40 AM »
KISS principle, Ball bearings
Logged

Jordan1200

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 97
  • www.CVOHARLEY.com
    • ON

Re: SE air cleaner backing plate?
« Reply #8 on: January 18, 2020, 11:25:36 AM »
Quote from: HD Street Performance on January 18, 2020, 11:21:40 AM
KISS principle, Ball bearings
Worried they would come out and get into the engine

Sent from my SM-G960W using Tapatalk

Logged
2010 Street Glide 96" (Canadian edition)
S&S 106 Big Bore
Stage 2 ACR Heads
Fueling Oil Pump
Fueling Cam plate and
Fueling 543 Gear Drive cams
Supertrapp Supermeg 2 into 1 Exhaust

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: SE air cleaner backing plate?
« Reply #9 on: January 18, 2020, 12:02:46 PM »
Not if they are jammed in, interference fit, with loctite red. No way
Or just weld up the holes, 5 minutes with a tig
Logged
 

Page created in 0.134 seconds with 25 queries.