www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin' Eagle® Road King® => Topic started by: Screamin' Al on June 03, 2010, 05:07:06 AM

Title: '07 SERK Rear Fender Front Fixing "nut" size?
Post by: Screamin' Al on June 03, 2010, 05:07:06 AM

Can anyone give me the type and size of the socket required to remove the rear fender front fixing nut. The Parts catalogue quote the "nut" as part#8081 NUT SPACER, front location (2) - not a great deal of help. The dealer is still saying it's the same as the rear ie a torx nut, but it is certainly not. It looks what I would call a "spline" socket, but the size falls between an 8 and 10 mm in my set. Could it be that spline sockets are available in imperial? I had thought that they were similar to Torx...only one standard.

I'll try to post an image of the "rogue nut"

Hope you can help.

Title: Re: '07 SERK Rear Fender Front Fixing "nut" size?
Post by: Screamin' Al on June 05, 2010, 11:33:53 AM

Problem solved!! Although the female "nut"  is multipoint, I found an Allen key did the job. Happy days!