 |
|
- April 19, 2024, 10:00:14 AM
- Welcome, Guest
|
91
on: April 04, 2024, 06:04:01 AM
|
||
| Started by P_uffe - Last post by P_uffe | ||
|
Another pic.
|
||
|
92
on: April 04, 2024, 06:02:37 AM
|
||
| Started by P_uffe - Last post by P_uffe | ||
|
Hi.
I'm looking for a comfier 2up seat. I have found a seat from presumably a -06 Street Glide at a reasonable price. Would it fit? Hard to find info for our specific models. TIA Tried searching the threads but couldn't find any specifics. |
||
|
93
CVO Technical / Intake/Exhaust/ECM / Zippers MaxFlow Replacement Air Filter Element Only quantity 2 (#172-114)
on: April 02, 2024, 04:17:23 PM
|
||
| Started by roadrunner - Last post by roadrunner | ||
|
Hello All.
I have 2 unused Zippers MaxFlow Replacement Air Filter Element Only (#172-114) to give away, just pay for shipping. PM me if interested. Thanks! |
||
|
94
CVO Technical / Electronic Toys and Gadgets / Re: Wiring harness for running lights on chopped tour pac
on: April 02, 2024, 01:04:56 PM
|
||
| Started by paconico1992 - Last post by Hondo2doc | ||
|
I think Advanblack has the lights, wiring harness and template needed for chopped and king pak both.
Sent from my SM-G991B using Tapatalk |
||
|
95
CVO Technical / Electronic Toys and Gadgets / Re: Wiring harness for running lights on chopped tour pac
on: April 02, 2024, 11:07:53 AM
|
||
| Started by paconico1992 - Last post by tlr | ||
|
for a 2019 I think that Custom Dynamics may have that. I also want to add lights on the chopped tour pak. can you share what lights you are using?
Thanks |
||
|
96
on: April 02, 2024, 10:43:01 AM
|
||
| Started by mjb765 - Last post by mjb765 | ||
Good info.... Thanks Mike |
||
|
97
on: April 02, 2024, 08:54:55 AM
|
||
| Started by mjb765 - Last post by 9 1/2 Beers | ||
|
Mine was on the right-side |
||
|
98
on: April 02, 2024, 08:14:24 AM
|
||
| Started by JR’s 19 CVO - Last post by JR’s 19 CVO | ||
I bought these on ebay and am happy with them: I ranacross these and wondered if they were legit. Thanks so much !! |
||
|
99
on: April 02, 2024, 08:10:26 AM
|
||
| Started by JR’s 19 CVO - Last post by bad00serg | ||
|
100
on: April 02, 2024, 07:33:28 AM
|
||
| Started by mjb765 - Last post by mjb765 | ||
The limited cvo models have the harness already installed for the heated seat. The accessory harness for the m8’s (not sure if it’s different from earlier models) has multiple plugs, the one for the heated seat is switched on with ignition on once the harness is plugged into the accessory plug next to the abs module under the right side cover. I believe on the earlier bikes it used to be under the left side cover. There is additional wiring on the harness to wire directly to the battery for the other plugs but for the heated seat connector, you just need to plug in the harness. On my 2022 rgl, I simply tied off all the other wires since I only needed the heated seat connection. Thanks..If I remember correctly mine is under the left side cover....but the harness will be here in the next two or three days so I guess I will find out Thanks |
||