Once you finally get your bike after the refit, take it to a reputable trusted HD builder and have him go over the bike for a few minutes to see of it was re assembled correctly. If any issues come up they will be in or around the front fairing.Where all the action is. Things like wire routing, proper clips, washers, and correct torque or tightness on nuts and bolts are all easily assessed fairly quickly. If anything is a miss, make a list and go back to HD. That is what I would do. The dealer re doing 3 bikes like that in a hurry, who knows what slips they might make. Good luck. Oh, also check for scratches on newly installed body work. Some tins like the rear fender need very careful alignment as it is going in. Easy to scratch things up while bolting together. Check for scratches your self very carefully before you pick it up from HD. Cheers.