Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[100GOLD]

I lost the rear intake lifter this last summer. It mushroomed the lifter, and due to my lack of mechanical talent I think it messed up the lifter bore.

Does anyone make an oversised lifter kit and boring tool?

[HD Street Performance]

Have the case repaired. They can be sleeved by a good shop.

[trippy]

Feuling make oversize lifters.  Either 0.001" over or 0.0015" $289 part no 4051 or 4052, direct from Feuling.
Feulingparts.com.

[HD Street Performance]

If the bore is perfect, true, no scars sure but based on what was described I would want to have some very good measurements made before just jamming an OS lifter in there, Just me, your call.

[HILLSIDECYCLE.COM]

Set up in a vertical milling machine, that can be repaired.
Scott

[100GOLD]

Thanks fellas. Just by listening to it and how it runs, it acts like a collapsed lifter. Lots of clacking and kind of a dull miss. It sounds like you're talking a complete teardown and splitting of the cases to fix this?

[HD Street Performance]

Yes
Plus all the metal from the failure is probably still in the system unless they thoroughly flushed it.