Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3  All

Author Topic: New cam and lifter install( update )  (Read 7524 times)

0 Members and 1 Guest are viewing this topic.

08CVOSPRNGER

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 93
New cam and lifter install( update )
« on: April 29, 2014, 05:43:15 PM »

Pulled the trigger today and having the cams and lifters changed. Going with the tc24d cam s&s lifters. Will post update when done.
« Last Edit: May 19, 2014, 04:20:53 PM by 08CVOSPRNGER »
Logged

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4149

    • CVO1: 2012 FLHXSE3
Re: New cam and lifter install
« Reply #1 on: April 29, 2014, 06:13:47 PM »

I did almost the same. Looking forward to your results.

Sent from my SCH-R970 using Tapatalk

Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

Yellow09SERG

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2055

    • CVO1: FLTRSE3 YELLOW!!
Re: New cam and lifter install
« Reply #2 on: April 30, 2014, 01:59:02 PM »

Can't wait to see the results! Have the cam laying on the toolbox just can't decide what all needs to happen when I change it
Logged
Most great stores start with a bad decision

Ohio phil

  • C-YA
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 294
Re: New cam and lifter install
« Reply #3 on: April 30, 2014, 09:43:06 PM »

Okay I did those cans and lifters also had torque Inc. do the heads just clean them up shave them 30,000 gasket 10.2 /1 getting it tuned next week but it feels good I will give an update ASAP

C-YA Ohiophil
Logged

Twism_23

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 252
    • MB


    • CVO1: 2019 FLHXSE CHARRED STEEL LIGHTENING SILVER
    • CVO2: 2009 FXSTSSE3 COBALT BLUE
Re: New cam and lifter install
« Reply #4 on: April 30, 2014, 10:30:26 PM »

I did the same cams as well. Phil I went to 10.2 as well. Getting mine tuned later in May. I look forward to both your sheets!
Logged
2019 FLHXSE FM 128, Wood 22X-E, SE 64mm TB, 5.5 inj., D&D Billet Cat, Aim SDR, Legend  Revo-A, 12” F47, SE Vent. Extreme, SR Comp Ramp, Rekluse Slave

2009 FXSTSSE3, V&H PP, Exile open Primary, 14" Carlini, Danny Grey Shorthop 2 Up XL, HPI 51mm w/4.9 Injectors, Power Vision, AV&V Springs and Valves, Kury TC24D Cams, 10.2 Comp

2017 RGS - FM 124, SE 64mm TB 6.3 inj, Feuling 521, S&S Lifters & Oil pump & Cam plate, AIM SDR, F47 12", D&D Billet Cat,Corbin Classic Solo, 21" Aggressor

willyB

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1128
Re: New cam and lifter install
« Reply #5 on: April 30, 2014, 10:46:56 PM »

I did the GMR 577's which are nearly identical and S&S lifters. No headwork this year. My daughter's wedding is this June.

You're going to love the power delivery!

Without headwork and adding compression it's not a power monster but depending on your exhaust and tune you should see "somewhere" around 115 TQ and 105 HP.

My sheet is attached. You'll see that my V&H true duals with 4" Rineharts kill my HP in the upper range. It just flat lined. Runs great though.

Different Dynos + Different Dyno Tuners + Different Days - Different Exhaust x Solar Flare Levels = Different Results ;D
« Last Edit: April 30, 2014, 10:50:15 PM by willyB »
Logged
GMR 577 Cams, S & S Lifters, S & S Pushrods, V&H Headers, Rinehart 4” Slipons, TTS Tuner, 12" Yaffee Monkey Bars, Color Matched Chopped Tour Pak (510 HP and 763 TQ +/-)

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4149

    • CVO1: 2012 FLHXSE3
Re: New cam and lifter install
« Reply #6 on: May 02, 2014, 08:14:16 AM »

Any updates? WillyB is right I got 105hp and 114tq

Sent from my SCH-R970 using Tapatalk

Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

08CVOSPRNGER

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 93
Re: New cam and lifter install
« Reply #7 on: May 04, 2014, 12:28:38 AM »

Just got cams and lifters in on Friday. They had it on the lift when I went by today. Hopefully first part of this coming week I will get it back.
Logged

Ohio phil

  • C-YA
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 294
Re: New cam and lifter install
« Reply #8 on: May 04, 2014, 06:34:51 AM »

Mine is at Freedom Harley getting tuned tomorrow, also had a little wobble in front end hope it's not front tire only has 8,000 miles on it  :( It's hard to believe the price of tires list $212 for 18" dunlop
C-YA ohiophil
Logged

willyB

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1128
Re: New cam and lifter install
« Reply #9 on: May 04, 2014, 06:48:51 AM »

Mine is at Freedom Harley getting tuned tomorrow, also had a little wobble in front end hope it's not front tire only has 8,000 miles on it  :( It's hard to believe the price of tires list $212 for 18" dunlop
C-YA ohiophil
Here in St. Louis and depending about what dealer you go to they range from $270 to $189. So, if you have an option I'd shop around.
Logged
GMR 577 Cams, S & S Lifters, S & S Pushrods, V&H Headers, Rinehart 4” Slipons, TTS Tuner, 12" Yaffee Monkey Bars, Color Matched Chopped Tour Pak (510 HP and 763 TQ +/-)

08CVOSPRNGER

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 93
Re: New cam and lifter install
« Reply #10 on: May 04, 2014, 10:23:41 AM »

I order my tires from motorcycle super store. Got a Michelin commander 2 for $173 shipped. (200-55-17)
Logged

Yellow09SERG

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2055

    • CVO1: FLTRSE3 YELLOW!!
Re: New cam and lifter install
« Reply #11 on: May 04, 2014, 11:59:21 AM »

Jesse, you still happy with your set up now that you got some miles on her?

Sure be glad to see some more of the sheets coming in.

Everyone seems to be setting up at 10.2, any tuning problems or detonation problems? Could you have added any more compression without problems?

David
Logged
Most great stores start with a bad decision

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4149

    • CVO1: 2012 FLHXSE3
Re: New cam and lifter install
« Reply #12 on: May 04, 2014, 04:13:49 PM »

Jesse, you still happy with your set up now that you got some miles on her?

Sure be glad to see some more of the sheets coming in.

Everyone seems to be setting up at 10.2, any tuning problems or detonation problems? Could you have added any more compression without problems?

David

She's running smooth I put about 110 on her yesterday without a hitch. I may or may not have head work done in the offseason, Frank says 120/120 is easily attainable. For now though nothing but riding the rest of the season!
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

Ohio phil

  • C-YA
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 294
Re: New cam and lifter install
« Reply #13 on: May 04, 2014, 04:39:29 PM »

Jswerve
When they run smooth quiet and cool that's all I'm after, mine had the smooth and quiet stock now hopefully it has the cool to go along with it will find out if it ever hits 90 outside  :)
Logged

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4149

    • CVO1: 2012 FLHXSE3
Re: New cam and lifter install
« Reply #14 on: May 04, 2014, 04:41:06 PM »

Jswerve
When they run smooth quiet and cool that's all I'm after, mine had the smooth and quiet stock now hopefully it has the cool to go along with it will find out if it ever hits 90 outside  :)

The S&S premiums are quieter then stock but are still noisy. The heat is a bit less so far. Time will tell when the heat arrives. She runs hard though!
« Last Edit: May 04, 2014, 05:29:17 PM by Jswerve »
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High
Pages: [1] 2 3  All
 

Page created in 0.162 seconds with 21 queries.