www.CVOHARLEY.com
CVO Technical => Cleaning/Detailing => Topic started by: Mr D on September 02, 2021, 01:17:10 PM
-
What is the best process to remove the EPA sticker on top of the ventilator with out marring the gloss black finish ? 2021 CVO LTD
-
WD-40 Spray it on the sticker if you cant remove it without damaging the ventilator and then use a plastic scraper to lift an edge and gently pull the sticker up.
Use more WD-40 To remove any remaIning adhesive.
Jerry
-
WD-40
Remove the sticker & use WD to remove glue ?
-
What is the best process to remove the EPA sticker on top of the ventilator with out marring the gloss black finish ? 2021 CVO LTD
Remove it and turn it upside down, that's what I did with my 2019
-
Remove it the residue with Goop Decal remover or just turn the breather housing upside down. I have turned the last three I had upside down.
-
Thanks Guys for the assistance with this :2vrolijk_21:
-
Wire wheel on a bench grinder.
(ok, seriously, no one do this)
-
Wire wheel on a bench grinder.
Don ;D
(ok, seriously, no one do this)
-
Leave it on and flip it upside down. Ive done both of mine that way. It's always sticker side up when it comes back from the dealer for service so I know they at least had that part off.
sent using Tapatalk