Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Speedo/6th gear light on/off  (Read 2848 times)

0 Members and 1 Guest are viewing this topic.

Tazzman

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
  • www.CVOHARLEY.com

Re: Speedo/6th gear light on/off
« Reply #15 on: September 06, 2023, 03:31:45 PM »

UPDATE.....
Removed old Badlands Resistor and now b 1006 cleared.
Took connector to CKP Sensor apart and cleaned contacts then reassembled with Dielectric grease then went for a blast with no fault codes showing.
Just been out again and although the bike is running well i checked codes on return to find the P0374  code showing ?? bike running well with no spluttering or engine management light on.
What do you think ?
Cheers
Neil
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50549
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Speedo/6th gear light on/off
« Reply #16 on: September 06, 2023, 06:40:31 PM »

Crank sensor error.  First free and easy thing to try is to remove and wipe it off.  Hope that in doing so you don't find frightening debris on it.  If you find no frightening debris and after cleaning it the code returns again replace the sensor.
Logged

TN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2944
    • SC


    • CVO1: FLTRSE3
Re: Speedo/6th gear light on/off
« Reply #17 on: September 07, 2023, 11:30:05 AM »

When I do any kind of electrical in the shop I first at least pull the main fuse. There is a certain sequence to follow.

Take your A/C off, backing plate too. Clean the connectors at the throttle body plug like you did the CPK. Look on top of throttle body and you will see the MAP sensor, same with plug there too. Be careful with plugs and wires. You can remove the MAP if ya choose, sometimes they need cleaning. Good idea to pull CPK from front clean and inspect, as mentioned earlier.

Pay close attention to plugs……..., pins and sockets as much as you can. Assemble, ride, check for codes.
Logged
Wut the hell was that maneuver

Tazzman

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
  • www.CVOHARLEY.com

Re: Speedo/6th gear light on/off
« Reply #18 on: September 07, 2023, 06:23:07 PM »

Good advice thanks  :) will get onto it this weekend
Logged

Tazzman

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
  • www.CVOHARLEY.com

Re: Speedo/6th gear light on/off
« Reply #19 on: September 18, 2023, 03:00:49 PM »

All seems good now, i was advised that a Vance and Hines Fuelpak would be a good idea !! have you any opion on these ?
Cheers
Neil
Logged

TN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2944
    • SC


    • CVO1: FLTRSE3
Re: Speedo/6th gear light on/off
« Reply #20 on: September 19, 2023, 06:28:14 AM »

All seems good now, i was advised that a Vance and Hines Fuelpak would be a good idea !! have you any opion on these ?
Cheers
Neil

I have no experience with that tuning device so I will not comment, my suggestion would be a powervision or other flash tuning device.
Logged
Wut the hell was that maneuver

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4064

Re: Speedo/6th gear light on/off
« Reply #21 on: September 19, 2023, 09:50:50 AM »

Welcome to the forum Neil great guys n gals here all wiling to help and share 😀

You mentioned a Fuelpak, I've got one on my 07 ultra  it seems to work OK  the only thing is not may "if any" tuners will touch you bike with a Fuelpak on it,..least that's what I'm finding.  I my be changing mine it been on the bike since new 2007 out of date.

If you haven't yet got one get it touch with Alex at Fast Lane Head Works,  he's bast in Lincolnshire  great guy he'll help you out.

Tell him Pete with the CVO  and rod bushings said to call.

Logged
Pages: 1 [2]  All
 

Page created in 0.121 seconds with 21 queries.