www.CVOHARLEY.com

Custom Vehicle Discussions => CVO™ Breakout™ => Topic started by: divedolphin on May 09, 2018, 09:27:33 AM

Title: Recommendations for oil cooler
Post by: divedolphin on May 09, 2018, 09:27:33 AM: Can anyone recommend an oil cooler to fit a 2013 CVO Breakout that looks good on the bike? A chrome model would be a plus.

Most of the ones I’ve looked at are ugly and ruin the looks of the bike.

Thanks

Ralph

Sent from my iPhone using Tapatalk
Title: Re: Recommendations for oil cooler
Post by: RoadDawg on May 09, 2018, 09:47:25 AM: I have mighty might love jugs, a Jagg oil cooler and a Harley oil cooler on mine. You can see the Jagg is a black side mounted affair and it does not ruin the looks of the bike. In my estimation, it makes the bike look badazz. The fans are small and might be a better option because they are fantastic and really do keep the engine heat down, even while the bike is standing at idle. Harley makes an oil cooler that fits between the down tubes and has a chrome cover.
Title: Re: Recommendations for oil cooler
Post by: divedolphin on May 09, 2018, 10:02:41 AM: Are those the small love jugs? Were you able to mount them with the frame mount kit?

Sent from my iPhone using Tapatalk
Title: Re: Recommendations for oil cooler
Post by: RoadDawg on May 09, 2018, 10:56:25 AM: Yes the small ones called Mighty Mights. Had to take my custom horn off and remount the stock horn in order to mount the fans. Here are the instructions: https://love-jugs.com/mighty-mite-installation-instructions-10-steps-to-the-best-ride-you-ever-had/
Title: Re: Recommendations for oil cooler
Post by: CHH_Badkarma on May 09, 2018, 12:27:20 PM: Oilbud. Tucks up under the frame, built like a tank, initial install dropped my oil down to 225-225
Title: Re: Recommendations for oil cooler
Post by: HDBill on May 15, 2018, 11:27:54 AM: I have an ultra cool that was best looking I found. It's a tight install but not overly difficult.
Title: Re: Recommendations for oil cooler
Post by: gmeikle on May 22, 2018, 10:03:43 AM: https://www.ebay.com/itm/Harley-Touring-Oil-Cooler-Billet-Fits-Any-Twincam-Softail-Deluxe-FLSTN-Rocker-C/222983173805?hash=item33ead536ad:g:kqkAAOSwQcJaI9tg

I have used these here in Perth Western Australia Australia for many years now. I have also put them onto all of my mates bikes as well.

ABSOLUTSELY the best bang for the buck bar none.

Drops oil temps 20F. and you can use black OEM filters thereafter.

I did big back to back tests against the genuine HD plumb in oil cooler radiator system and these work just as well for $45 USD.

Harley used to retail them and this guy made them. I have no interest in the seller or his company , I am just a 100% satisfied customer.
Title: Re: Recommendations for oil cooler
Post by: divedolphin on May 22, 2018, 06:56:44 PM: Does it just slip over the oil filter?

Sent from my iPhone using Tapatalk
Title: Re: Recommendations for oil cooler
Post by: gmeikle on May 22, 2018, 07:39:11 PM: Yes indeed. They "work" on the heat sink principle , just like the regulator/rectifier already on the bike for the charging system.

It gets pretty hot here in Australia , and these work just fine