Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[DTR]

So after the first 350 miles on my new BO (Standard), my shoulder tells me that I need to adjust/change the bars or risers. I would prefer to just put a set of pullback risers on to move the stock bars closer. According to my measurements, the stock ones are 4" high, and 1" back (center to center). The bars measure 1.25 where they clamp.

1. Do my measurements sound correct, before I order anything?

2. Has anyone installed a set that had a pull back of around 3"? Brand? Likes?

3. Will the speedo hit the take with a 4"x3"? Or can the speedo be reversed to the front side of the bars?

4. Will the Cables reach?

5. Do I need to look for a 5"x3"?

Any help would be greatly appreciated.