www.CVOHARLEY.com
CVO Technical => Wheels/Tires/Suspension/Brakes => Topic started by: Zee110 on April 29, 2012, 01:29:02 AM
-
Has anybody used this for puncher protection and wheel balancing? Would like to know if you are supposed to remove
wheel weights after injecting this into tires
Thanks in advance
-
IMHO, better to carry a plug kit and mini air compressor on the bike.
-
IMHO, better to carry a plug kit and mini air compressor on the bike.
Yep, +1
but before getting set up with plugs and compressor, I have had occasion to use shoosh a couple of times.
Had no major dramas and ended up running tire out both times.
Didn't remove weights either.
-
I'm going to try it next week in my Bushtec tires.
-
I could see using it on the trailer tires but might be a little reluctant to put it in my bike tires. :-\
-
I could see using it on the trailer tires but might be a little reluctant to put it in my bike tires. :-\
It keeps throwing weights, so our local Bushtec dealer recommended this stuff. He said its not as effective for leaks on tube tires, but will balance things out ok. I researced it a little and the demos on Youtube are impressive with motorcycle tires. Doc
http://www.youtube.com/watch?v=YqkBfEHYzxw
-
been using it for years. no issues whatsoever. have found a screw in the tire, which I found on inspection. no air leak. this stuff doesn't stick to your wheels either. washes off easily with water.