Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[andrew pasquale]

I need a replacement front fender for my 05 CVO FLHTC.Is this a Standard FLH Fender with no holes? Or is it Custom?

[davidw221]

A street Glide fender will work for your application, the hard issue is to find a painter who is good enough to match colors, or buy a OEM from the dealer.

[porthole]

I need a replacement front fender for my 05 CVO FLHTC.Is this a Standard FLH Fender with no holes? Or is it Custom?

It is a no frills bare fender. No fender extensions on the rear bottom or front. The newer street glide fender might look even better.
I replaced mine with an aftermarket all steel, no rivet fender that is also lowered 1 inch.

I had all my paint work done by Toon Town paint in New York, but the painter in South Jersey looks ot be doing real nice work. He is on the site here as "Xtreme Dimension"

Russ Wernimont is mine, and it looks like they have changed (for the better) the design.
http://www.russwernimont.com/1401-0139-FRONT-65-FENDER-FOR-ROADGLIDES-OR-ROADKINGS-F16-18-94-07_p_72.html

The newer fenders have a one piece mount. Mine uses spacers between the fender and the fork tubes.


New versus old

[andrew pasquale]

Nice Fender ,I may go that route also,and Extreme Painting out of NJ is doing my paint. Thanks

[Grizzly]

It is a no frills bare fender. No fender extensions on the rear bottom or front. The newer street glide fender might look even better.
I replaced mine with an aftermarket all steel, no rivet fender that is also lowered 1 inch.

I had all my paint work done by Toon Town paint in New York, but the painter in South Jersey looks ot be doing real nice work. He is on the site here as "Xtreme Dimension"

Russ Wernimont is mine, and it looks like they have changed (for the better) the design.
http://www.russwernimont.com/1401-0139-FRONT-65-FENDER-FOR-ROADGLIDES-OR-ROADKINGS-F16-18-94-07_p_72.html

The newer fenders have a one piece mount. Mine uses spacers between the fender and the fork tubes.


New versus old

Just seeing this post for the first time and I just have to say that your NEW fender looks way better than the old one. 

Is it possible to post a pic of the entire bike to show how the new lines on the fender work so much better with the rest of the bike?
I'm considering selling my SEEG, but if not I think I will do something similar because I've never liked the paint on the fender from the factory.

Thanks!

[porthole]

Hey Grizz - just saw this request.

I'll work on it. I like the fender but once on the bike I would change it bit.
You'll see when I post the pic. But, the dark cherry part - I would redo so it flows with the tire black.

I really should have dropped off the tank as well when I did this. The gold stripe is a bit too wide as is the pin striping. And once all together the pin striping is a shade off. The painter also did not do the pin stripes as was chalked on the fender and agreed to. But, I had waited quite awhile and wanted to get it back together, so I accepted it.

Just seeing this post for the first time and I just have to say that your NEW fender looks way better than the old one. 

Is it possible to post a pic of the entire bike to show how the new lines on the fender work so much better with the rest of the bike?
I'm considering selling my SEEG, but if not I think I will do something similar because I've never liked the paint on the fender from the factory.

Thanks!

[porthole]

Fender pics






If I was to re-do this I would have the dark cherry flow with the tire at the front portion of the fender, and narrow the gold to match the tank.

[johnsachs]

Duane, your bike looks real good ... 

[porthole]

Thanks John, not bad for a gettng old girl. Runs pretty good too.

[Grizzly]

Thanks for posting the pics Duane.

Your bike looks amazing! 

All dressed up and everywhere to go!

Enjoy a safe and adventurous summer riding your "new look" SEEG.

Mike