Yes I did. Bought male/female Molex and appropriate clips and put the connector under the seat. Encased wires in correct size smooth automotive wiring flex tube thru bottom of tourpak thru a rubber grommet to weather seal. All t/p wires stayed under the metal base in the channels inside the t/p.
When you wanted it off, just raise seat, uplug and wiring all stayed with the t/p, the connector was the only thing under the seat that stayed on the bike. I had a LED tube on the back of chrome tourpak rack that I ordered from Radiantz the correct length with run/turn (turn split in middle) and a longer led tube just below the edge of lid on the back that was run/brake and added a Custom Dynamics controller just in front of connector under seat that Strobbed all of them on brake activation. Took me about half a day but it worked great. And when you took tourpak off, only the one plug and the two tourpak connectors on the mount and bike was back to solo.