Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: AN3 HYDRAULIC CLUTCH LINE  (Read 1403 times)

0 Members and 1 Guest are viewing this topic.

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1214
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
AN3 HYDRAULIC CLUTCH LINE
« on: April 19, 2021, 02:21:26 PM »

I have read and see charts that show AN3 can use 1/8" or 3/16" I.D. Hydraulic lines. All the listing on Harley show only the 1/8" I.D. lines. Saw that a small diameter line can impead flow, making a harder clutch pull and  slower Clutch release.
   For some reason my Baker Hydraulic Clutch with HD V-Rod 11/16" Master Cylinder is correct for the Baker 1.5" Slave on the Hydraulic Clutch Cover.
Baker says AN3 with Hose I.D. of .13"  Problem is I can't find that size Hydraulic line with a I.D. of .13"
Any help is appreciated.  What size I.D. is on the standard Harley Hydraulic Clutch Lines?
I need a line with a AN3 30° at both ends and 81" eye center to eye center.
Logged

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1214
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Re: AN3 HYDRAULIC CLUTCH LINE
« Reply #1 on: April 19, 2021, 08:55:34 PM »

Well, I spent hours searching. I only found one place that had .13" but I found several. .138" I.D. line. So, I'm really confused. I bought 7' of the .138" AN3 line and two AN3 30 degrees fittings that 's supposed to work together. We shall see guess. But only one place has .13" but they didn't sell .13" AN3 fittings.
Makes the choice difficult. I hope I didn't waste my money AGAIN!
Logged

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1214
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Re: AN3 HYDRAULIC CLUTCH LINE
« Reply #2 on: April 23, 2021, 02:15:04 PM »

Success! The .138" AN3 Hydraulic Clutch Line makes the Clutch Pull much Easier! My Local shop it wouldn't,  well he's not correct this time! According to my Fish Scale pull is almost 10 pounds lighter!
24 to 15 lbs. No to install the AIM Lock-up Head then put 3 lighter springs with the ones in the Clutch i Will be Good and my Hand will thank me. It took time but it paid off! Just had to Share the Results. It might help someone else with a bad Clutch hand and a Hydraulic clutch that's a stiff pull.
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: AN3 HYDRAULIC CLUTCH LINE
« Reply #3 on: April 23, 2021, 04:56:16 PM »

Success! The .138" AN3 Hydraulic Clutch Line makes the Clutch Pull much Easier! My Local shop it wouldn't,  well he's not correct this time! According to my Fish Scale pull is almost 10 pounds lighter!
24 to 15 lbs. No to install the AIM Lock-up Head then put 3 lighter springs with the ones in the Clutch i Will be Good and my Hand will thank me. It took time but it paid off! Just had to Share the Results. It might help someone else with a bad Clutch hand and a Hydraulic clutch that's a stiff pull.


 :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Logged
 

Page created in 0.125 seconds with 21 queries.