Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hrdtail78]

he bike is a 04 SE-glide.  I have ECM pn 32852-08 From 07 Dyna.  Will this fit this bike so I can run O2's?

[Ed Ramberger - One_Screamin_Eagle]

he bike is a 04 SE-glide.  I have ECM pn 32852-08 From 07 Dyna.  Will this fit this bike so I can run O2's?

The 05 ECM's and later are set to run O2's.  I have converted several earlier bikes to closed loop with later ECM's.  Drop me a line if you have any questions. There are most likely a few details you will have to iron out.  Some heads up things are the fact that you will most likely be using a 2006 Dyna closed loop map and that bike had a different throttle body than the 2004 FL so copying and pasting the IAC Warmup tables will most likely be necessary because the warmup steps are different. Also, DO NOT extend the O2 sensor wiring to meet the harness.  You must run harness wiring to the O2s. The O2s breathe through their wires.