www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: stuart1270 on January 30, 2020, 03:42:07 PM

Title: Software update
Post by: stuart1270 on January 30, 2020, 03:42:07 PM
Has anyone tried the new boom 6.5GT update. If so are there any issues
Title: Re: Software update
Post by: rayson56 on January 30, 2020, 06:47:30 PM
Yup, new .3 update as of 1/21/2020.

Haven't heard anything yet.
Title: Re: Software update
Post by: ATGuinness on January 30, 2020, 09:36:47 PM
More to the point, does anyone know what the update actually does?  For some of us it may not be worth the trouble of downloading.
Title: Re: Software update
Post by: Eqcons on January 31, 2020, 05:45:07 AM
CVO version has NOT been updated - only the non CVO 6.5 version, and according to the website:

Fixes


• Arrival time showed the current time after user deviated from a route.

• Next turn area displayed an arrow with the current street name.

• Special Alpha Jump characters were not displayed.

• The SMS (Short message service) repeat button wouldn’t read the message clearly if pressed multiple times before it has completed the readout.

• Audio paused after loading a ringtone.

• VR (Voice recognition) not working after an ignition cycle.

• Local media preset inconsistent between shutdowns.

• User was unable to search for preferred POI (Point of interest) after simulation sleep.

• Constant “Game Start” pop-ups.

• Presets from USB (Universal serial bus) drive 1 were still visible on USB drive 2 but not highlighted as available.

• Albums and artists heading were mismatched with list.

• AM (Amplitude modulation) radio presets not highlighted when USB was unplugged.

• Repeat button NOT enabled on first selection.

• Pre-cal reset did not delete trails.

• Accept screen appeared for less than 15s after exiting User Off mode.

• Saving or editing emergency number did not work.

• No Siri® pop-up displayed while saving an emergency number.

• Text was missing in the maneuvers list after switching to high contrast mode and then back.

• No initial Siri pop-up initiated.

• Cancel noise was heard when going from VR to Siri.

• Prompt Volume was not updated after changes in Feedback Settings.

• GPS (Global positioning system) entry changed W(O) to E in Spanish.

• WHIM (Wireless headset interface module) – Low battery pop-up was not shown for passenger headset.

• WHIM – Paired Bluetooth® device name appeared as “Headset”.

• Repeat prompt was not working.

• SiriusXM® weather map did not maintain the default zoom level.

• User off mode enabled navigation prompts.

• VR conflict if Siri was launched from phone at the same time with the radio.

• Saved USB presets for drive 2 were replaced by drive 1 after an ignition cycle.

• USB saved as favorite was not highlighted after an ignition cycle.

• Distance to next action bar disappeared before route recalculation instead of being grayed out.

• “Navigation is not ready” displayed when initiating navigation command to “Find Next Gas Station” via VR.

• Various bug fixes
Title: Re: Software update
Post by: Glenncarp on January 31, 2020, 07:47:05 AM
CVO version has NOT been updated - only the non CVO 6.5 version, and according to the website:

Fixes


• Next turn area displayed an arrow with the current street name.

Hallelujah!!!!! Been waiting for this stupidity to be fixed since they screwed it p on one of the initial updates!  Now, have to go back and hunt for EXACT way to install update. lol
Title: Re: Software update
Post by: WTF Chuck on January 31, 2020, 01:39:23 PM
BOOM!™ BOX PREMIUM CVO
Version: 1.22.0.3 | Size: 842 MB
Date Released: 1/21/2020
Title: Re: Software update
Post by: Eqcons on January 31, 2020, 01:45:44 PM
Interesting!   the CVO version is still the old one for us.... https://www.harley-davidson.com/gb/en/owners/software-updates.html  but the non-CVO one is updated.
Title: Re: Software update
Post by: Eqcons on January 31, 2020, 02:00:25 PM
Actually, I've just downloaded the HDI version, and I believe it's the update, despite what the page says.
Title: Re: Software update
Post by: WTF Chuck on January 31, 2020, 02:27:37 PM
try this link

https://www.harley-davidson.com/us/en/owners/software-updates/boom-box-65gt.html
Title: Re: Software update
Post by: Eqcons on January 31, 2020, 02:35:11 PM
Yep, saw that - no HDI version there.
Title: Re: Software update
Post by: CVODON on January 31, 2020, 09:00:01 PM
Has anyone checked to see if a new map update for the GT is available?
Title: Re: Software update
Post by: SDCVO on January 31, 2020, 10:46:50 PM
Still no distance to first turn?
Title: Re: Software update
Post by: Glenncarp on February 02, 2020, 03:42:34 PM
Well, that sucks, Did not know my '19 RG Special has the GTS, not the GT 6.5. Not the GT 6.5 for CVO, sooooo, this is third time I have downloaded an update thinking it was an update, and my system says same version is on bike. M20.19.39.00.

Wonder why HD would push out an update for only one version? How hard would it be to modify the update for the other versions of the Infotainment system? Why do we have to wait for their fixes on stupid software longer than others?

Sometimes I REALLY have to wonder who MOCO hires to run their tech side of things. SMH.

Anyone know what I am missing here?
Title: Re: Software update
Post by: Eqcons on February 03, 2020, 06:16:13 AM
I can confirm the HDI CVO version IS the new update, despite the page still listing it as the old version.
Title: Re: Software update
Post by: Trigger-Man on February 13, 2020, 07:23:19 PM
Has anyone checked to see if a new map update for the GT is available?
Just checked and via Naviextras Toolbox updated my 2015 FLTRUSE to NACVO-MY2020. Used my last (third) free update allowed within 5 years :coolblue:! Had to remember exporting a "thumbprint" of my current setup to a thumbdrive to authenticate my entitlement ::).
Title: Re: Software update
Post by: MC16LTD on February 21, 2020, 12:18:22 PM
Just checked and via Naviextras Toolbox updated my 2015 FLTRUSE to NACVO-MY2020. Used my last (third) free update allowed within 5 years :coolblue:! Had to remember exporting a "thumbprint" of my current setup to a thumbdrive to authenticate my entitlement ::).

Thank you for highlighting the "thumbprint" I had checked to update mine and all I saw was $$ signs, did the thumbprint and new update.    :2vrolijk_21:
Title: Re: Software update
Post by: RoadTrip on February 21, 2020, 09:24:42 PM
I owe you a beer.

As I recall, the thumbprint approach was not required when I did my last map update in 2017, so I thought my "free" period had expired (couldn't remember if it was 3 or 5 year limit). Anyway, got the new map downloaded this evening and will install this weekend. Thanks!
Title: Re: Software update
Post by: Trigger-Man on February 22, 2020, 02:01:24 PM
I owe you a beer.

As I recall, the thumbprint approach was not required when I did my last map update in 2017, so I thought my "free" period had expired (couldn't remember if it was 3 or 5 year limit). Anyway, got the new map downloaded this evening and will install this weekend. Thanks!
You're welcome RoadTrip …..instead of the beer, if you haven't already, consider ordering a set of Triple SPLITSCREENS from https://motorcycleventscreens.com/ for your ride. CVO Forum members may use Coupon Code for CVOHFM-10 to receive a discount.