I took mine apart, cleaned out the inner side of the black trim with Goop remover, then removed that residue with Brake parts cleaner. Used a new tube of marine grade (fish aquarium) silicone that I cut the tip on to fit inside the trim, left a very fine bead, cleaned the edge of the fairing the same way, just used 3M wax/grease remover to remove the residue then stuck it on and it has now held very solid for 3 months. May fall off tomorrow but I no longer have black sealant squeezing out and the trim falling off all the time. Rather do it myself (neatly) than have the wash boy/low grade HD tech do it quickly for free under warranty and leave scratches, silicone sealant all over my paint (like they did on my SEEG a few years ago)