www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' Eagle® Fat Boy® => Topic started by: TankerPig on May 14, 2010, 09:44:32 PM
-
I've finally installed the nacelle kit (after some heartache with eBay sellers). Install wasn't difficult. Hardest part was realizing I couldn't use the headlight connector harness that came with the kit and having to solder the original one back to the wires. Only thing I'm not entirely comfortable with is a gap at the bottom of the visor headlight trim ring I put on (separate item, didn't come with kit). Anyone else that have the nacelle kit have this issue?
And a big thanks to Rescueu2 for his help!
And please ignore the fingerprints all over the chrome :-\
-
a pic of the gap at the bottom I mentioned
-
that gap is fairly normal with that trim ring
-
that gap is fairly normal with that trim ring
Ditto... It's that way w/the trim ring on mine. :(
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Hey Tankerpig, Looks great!!
Glad I could help!! My trim ring has the same gap, poor design to say the least, but it is a better looking trim ring compared to the gay ass one HD sends with the kit!!
-
Looks good, It should've came from the factory like that!
-
Great look
-
:orange: yeah I got that same issue on my 2004 FLSTCI and used a piece of chrome tap to cover it. looks better than that gap and iagree harley design engineers are having problems in several areas of there calculations and fitting! :orange:
-
Looks great, nice job.
-
I know this is old but where do you get that headlight kit part number and how much money you spent altogether if you don't mind to say