Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[barrhill]

has any one done this
I have ciro 3d frame mounted foot peg brackets  would I be able to add pingle 1 1/4 floor board spacers also ?

2019 cvo road glide custom
sorry no pictures bike in shop getting 131 kit

[Mofo67]

If you are using the spacer kit that moves the floorboard out 1 1/4” the answer is yes, but you would have to buy an extra set of spacers. The mount of the Ciro 3D uses two bolts to mount it, the factory only uses one. I did this when I installed my S&S Sidewinder. It uses a similar spacer and I simply bought and extra kit and did the Ciro 3D install without issue.

[barrhill]

thanks

[DOCGSS]

If you are using the spacer kit that moves the floorboard out 1 1/4” the answer is yes, but you would have to buy an extra set of spacers. The mount of the Ciro 3D uses two bolts to mount it, the factory only uses one. I did this when I installed my S&S Sidewinder. It uses a similar spacer and I simply bought and extra kit and did the Ciro 3D install without issue.

I have done this. I did not buy a second set of spacers, I bought a nut for a half inch bolt that was a half inch thick. You could not see it and it worked out fine. I had to buy new bolts also as they were not long enough. I love the setup.