www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin' Eagle® Road King® => Topic started by: Screamin08 on November 13, 2012, 12:58:40 AM

Title: 08 SERK tail light
Post by: Screamin08 on November 13, 2012, 12:58:40 AM

How do you get to the tail light bulb on these tombstone tails. Please tell me you do not have to go from under the fender and unbolt the whole assembly :nixweiss:. Thanks everybody

Title: Re: 08 SERK tail light
Post by: Twolanerider on November 13, 2012, 02:26:21 AM

Three screws through the outer body, gasket and lens.  See if this helps:

Title: Re: 08 SERK tail light
Post by: Screamin08 on November 13, 2012, 04:36:28 PM

Oh Ok, Thats what I thought, but when I took out the 3 screws, it was stuck on there good which made me believe that wasn't right. I will pull harder this time, LOL...Thanks!!

Title: Re: 08 SERK tail light
Post by: DionW on May 08, 2023, 09:33:47 PM

Oh Ok, Thats what I thought, but when I took out the 3 screws, it was stuck on there good which made me believe that wasn't right. I will pull harder this time, LOL...Thanks!!

@ Screamin08
Did you have any luck?  I have the same problem.