Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[amigo Jorge]

I am aware that they are a couple of threads similar to this topic but I would need the following.

I want to replace the stock drag bars in the FXR4 with something more comfortable and I want internal wiring for a clean look. The knurl center-to-center for the FXR4 is 3.14" so now my question is:

Can I go with any bar that I like if it has 3.14" for the "knurl center-to center"? I know that I would have to change the idle & throttle, clutch & brake wire but I wouldn't mind to that. Also I know that it has to be 1" and not for hydraulic clutch.

In the 2010 parts catalogue, page 576 there are a list of all the bars available and shows those with 3.14" knurl center so  I might find what I am looking for.

Thanks for your help......

Jorge

[skreminegul07]

Jorge,
Basically any bar will do as you described.  I went with the old style FXR bars which are exactly like the Softail Deuce bars only narrower. 56082-83T ( If you see two part numbers the same, T= Chrome)
All cable and wiring and brakes fit, even with 4 1/2 pullback risers.
You could go with 11/4" bars and different risers.

[amigo Jorge]

Jorge,
Basically any bar will do as you described.  I went with the old style FXR bars which are exactly like the Softail Deuce bars only narrower. 56082-83T ( If you see two part numbers the same, T= Chrome)
All cable and wiring and brakes fit, even with 4 1/2 pullback risers.
You could go with 11/4" bars and different risers.

Thanks mi amigo but those doesn't accept internal wiring , right?

[skreminegul07]

correct, 1" bars won't accept internal wiring.  Not much from HD does.  Wild Ones has drag bars.

[amigo Jorge]

correct, 1" bars won't accept internal wiring.  Not much from HD does.  Wild Ones has drag bars.

I will keeping looking for.............1", 3.14" "knurl center-to center" and not too be used with hidraulic clutch....