www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: Bankrupt on July 17, 2018, 07:20:39 PM

Title: Front Turn Signal Issues
Post by: Bankrupt on July 17, 2018, 07:20:39 PM

I have a 12 SERG and my right front turn signal stopped blinking. I took the nose off and started tracing the wires. I was checking the turn signal/security module and tested again while apart. It worked fine. I put everything back together then tested again. Right back to not flashing again. Both front ones not working now. The rear lights are working as they should. I'm thinking the module runs the turn signals and the alarm? Not sure. Was looking for ideas? Anyone else have any issues like this? Thanks for your help!

Title: Re: Front Turn Signal Issues
Post by: Bankrupt on August 06, 2018, 11:43:06 PM

Went on a ride a week ago and now the speedo & tach gauge aren’t working along with the cruise. Ugh... please help!


Sent from my iPhone using Tapatalk

Title: Re: Front Turn Signal Issues
Post by: Phreakyz on August 07, 2018, 08:57:58 AM

My old 2012 Road Glide once set the security light and the Frt Turn Signal on the RH Side stopped flashing.    It also sets a code when the Security light comes on.    I was able to trace it down to a pinched wire between the faring and the RT turn signal housing.    If the security light is on check the code - it might steer you in the right direction.    Not sure if that helps but that is what I encountered.

Title: Re: Front Turn Signal Issues
Post by: Bankrupt on August 07, 2018, 05:28:25 PM

I’ll start there. Thank you for the info!


Sent from my iPhone using Tapatalk