www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Bitubo for lowered 04 seeg  (Read 1534 times)

0 Members and 1 Guest are viewing this topic.

harleydawg57

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 126
  • "Raring to go-- but can't go for raring!!"

    • CVO1: 2004 SEEG orange/black
Bitubo for lowered 04 seeg
« on: April 18, 2008, 11:44:28 AM »
Just talked to Dan at Traxxion and he advised he was out of shorter Bitubo's for lowered SEEG but expected some in with in next 2 weeks.
Logged
2004 SEEG Orange/Black
HD six speed-True Duals with Samson slip ons- S & S gear drive cams with oiling fuel pump-power commander-Kuyakyn rear adjustable rider pegs-HD tuner-Hawg-Wired amp and speakers w/Sony Tuner xm sat radio-Boogey Lights

jawarford1

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 90
Re: Bitubo for lowered 04 seeg
« Reply #1 on: April 20, 2008, 05:57:22 PM »
How did you go about lowering your 04 SEEG ?
Logged

harleydawg57

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 126
  • "Raring to go-- but can't go for raring!!"

    • CVO1: 2004 SEEG orange/black
Re: Bitubo for lowered 04 seeg
« Reply #2 on: April 20, 2008, 09:30:01 PM »
It comes stock lowered. 
Logged
2004 SEEG Orange/Black
HD six speed-True Duals with Samson slip ons- S & S gear drive cams with oiling fuel pump-power commander-Kuyakyn rear adjustable rider pegs-HD tuner-Hawg-Wired amp and speakers w/Sony Tuner xm sat radio-Boogey Lights

jawarford1

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 90
Re: Bitubo for lowered 04 seeg
« Reply #3 on: April 20, 2008, 10:31:59 PM »
Right.... I know that it has a lower ride height then a standard E-glide....  But have you heard of anyone lowering them say an inch ?
Logged

Chief

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5919
  • EBCM #4-3/8
Re: Bitubo for lowered 04 seeg
« Reply #4 on: April 21, 2008, 07:43:17 AM »
Quote from: jawarford1 on April 20, 2008, 10:31:59 PM
Right.... I know that it has a lower ride height then a standard E-glide....  But have you heard of anyone lowering them say an inch ?

If you do that, you'll more than likely wind up with your tire bottoming out on the inside of the rear fender, possibly chewing up the wiring harness. Plus, you'll reduce lean angles even more than being down the initial inch.

If you want something lower for looks, go with an air-ride suspension. Drop it for show, raise it for go.

:indian_chief:
Logged
 

Page created in 0.152 seconds with 21 queries.