www.CVOHARLEY.com
CVO Technical => Drive Train => Topic started by: victor on March 29, 2023, 07:35:19 AM
-
Anyone replaced there's? Is there any aftermarket options or just oem?
Cheers.
-
You might put this in the "Drive Train" section https://www.cvoharley.com/smf/index.php?board=63.0 (https://www.cvoharley.com/smf/index.php?board=63.0) since the clutch slave is the same on other Twin Cams.
Ronnies Parts Finder https://partsfinder.onlinemicrofiche.com/ronnies/showmodel/11/harleydavidsonmc (https://partsfinder.onlinemicrofiche.com/ronnies/showmodel/11/harleydavidsonmc) is a good resource for part numbers and exploded views.
This is from the 2007 SERK (because it shows the parts kit, which several others don't) https://partsfinder.onlinemicrofiche.com/ronnies/showmodel/13/harleydavidsonmc/637 (https://partsfinder.onlinemicrofiche.com/ronnies/showmodel/13/harleydavidsonmc/637). It shows the part # is the same for '07 SERK and SESS.
-
Mueller Slave cylinder 35%reduced effort
Better engagement
-
Mueller Slave cylinder 35%reduced effort. Better engagement
Are you running one? If so, what can you tell us?
It looks like it doesn't fit pre 2014.