What can I say, I'm slow.
Actually I spent a lot of time on the heated grips. I had to modify the switch housings and the left grip. I also had to extend the grip to grip wire by about 10 inches. Then I added an extra acc switch to the switch panel and wired it in so that the grips do not receive power unless the switch is on. (I don't like the way they have you wire it in the instructions, especially since I ran all of the wires internally). I wanted to have a way to cut all power to the grips on command. I spent a lot of time pondering how to modify the grips and wires, then I spent extra time soldering connectors to everything and spent quite a bit of time cleaning since I had the bike apart.
I also had to take time out to play with the dog, listen to some good tunes, enjoy a good brew or two and ponder the meaning of life. All in all a very relaxing day. [smiley=givemebeer.gif]