Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: To the head porters, are the 110 heads a good platform?  (Read 1032 times)

0 Members and 1 Guest are viewing this topic.

bowtech40

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 72
To the head porters, are the 110 heads a good platform?
« on: January 08, 2013, 06:32:07 PM »

 I am curious if the 110 heads are a good starting platform, or would a stock casting or something else be a better choice? I read somewhere that the exhaust port is maybe to big in the 110 heads. Sort of planning my future here, so I am looking for input from the experts.
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: To the head porters, are the 110 heads a good platform?
« Reply #1 on: January 08, 2013, 09:40:09 PM »

They sure seem to work for us. :2vrolijk_21:
Scott
Logged

HD Street Performance

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2300
Re: To the head porters, are the 110 heads a good platform?
« Reply #2 on: January 08, 2013, 10:56:46 PM »

You can scale them any way you please and they will grow into a much larger motor if that is desired.
They work well all around.
Logged

prodrag1320

  • AMRA & AHDRA P/D record holder
  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 799
Re: To the head porters, are the 110 heads a good platform?
« Reply #3 on: January 09, 2013, 07:32:43 AM »

we`ve had good luck with them,wouldnt use them on a mild 95" build,but great for hot rod builds as long as their set up properley for your build (not just a bolt on thing)

TorqueInc

  • Get your facts first, then you can distort them as you please. Mark Twain
  • Vendor
  • Senior CVO Member
  • *
  • Offline Offline
  • Posts: 337
Re: To the head porters, are the 110 heads a good platform?
« Reply #4 on: January 13, 2013, 09:31:16 PM »

I am curious if the 110 heads are a good starting platform, or would a stock casting or something else be a better choice? I read somewhere that the exhaust port is maybe to big in the 110 heads. Sort of planning my future here, so I am looking for input from the experts.

  Takes very little work to make them into a first rate head,exhaust port being to large is not one of the actual problems
Logged
2011 SG Sedona Orange 103" 96/109

www.jwperf.com

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: To the head porters, are the 110 heads a good platform?
« Reply #5 on: January 14, 2013, 06:15:00 PM »

Robin Theme, head service tech,(and tuner) @ Gails H-D, Grandview, Mo, used a set of our 110" heads on his 107"er, with a Wood 8.
Ran off at 125 hp, as I recall.......
Dyno report is on HTT.
Those cylinder heads work well, once attended to.
Scott
Logged
 

Page created in 0.125 seconds with 22 queries.