Dave, what all does "your version" of the 117 consist of besides just the jug and piston change? Did you have head work done? Your numbers are fantastic! Does it run well on 91 octane fuel?
I used the HD cylinders, then had CP make pistons with a 10cc dome, for an 11.4 compression ratio. I am using the HPI 55mm throttle body I used on the last build rather than the 58 the kit uses. I am using woods TW-9B-6 cam. Don of HD street performance did my heads.
The cam is a bit noisy but not as bad as I was expecting. Woods are know for having noisy cams due to the aggressive ramp. It really not bad in my opinion, and well worth the power.
I have not tried 91 octane. It runs great on 93. I may find out in two weeks on the 91, as I'm going to Bikes Blues and BBQ on this bike in North west AR and 93 is not always available.
I'll go with a solid "yes" regarding the noise due to the 259 cam.
When I built my king the first time it was with the 259 E and head work and 10.8 pistons. I did not notice more noise than the stock 255 cam.