Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[darreldanger]

Hey guys, I just bought a 2004 SE Deuce with a 95" Screamin Eagle engine, what cams did it come from the factory with? Thanks...

[HD Street Performance]

Stock 88" cams IIRC

[Harleyrider_49]

Hey guys, I just bought a 2004 SE Deuce with a 95" Screamin Eagle engine, what cams did it come from the factory with? Thanks...

Have the same scoot....has the 95" 1550 Stage II kit,SE 203 cams,heads are the stock 88's,I think...C/R should be about 9.6,I believe....have only had this bike on the "Dyno-Drags" that go's around to dealers...if it's close.....put'n about low-mid 90's HP & TQ....don't have a "tuner" yet, and really need to change my pipes,and think it'll do a little better......lot's of great engine-mod guys here though,if ya wanna make any mods, they're the guys ta ask...

[HD Street Performance]

That's the kit and this is OEM from the factory 95". I would have to get into the CVO parts book to be sure but IIRC the SE bikes came with a stock cam. The add-on kit another story.

[Twolanerider]

That's the kit and this is OEM from the factory 95". I would have to get into the CVO parts book to be sure but IIRC the SE bikes came with a stock cam. The add-on kit another story.

The factory 95" motors got the SE203s.  I can go out and grab the parts manual for a citation should anyone want it. 

[Twolanerider]

The factory 95" motors got the SE203s.  I can go out and grab the parts manual for a citation should anyone want it. 

Grabbed it anyway.  From the 2000 FLTRSEI parts manual.  Cams are 25937-99A.  That's now a  B  revision.  But that's the 203 cams.  Heads are 16716-99 and 16717-99.

Same numbers from the 2002 95" motor in the SERKs also.

[HD Street Performance]

Thanks for the clarification

[darreldanger]

Thanks Guys