www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: GQ_Knuckle_Draggerz on June 28, 2018, 08:51:41 PM

Title: King Tour Pak wraparound LED kit
Post by: GQ_Knuckle_Draggerz on June 28, 2018, 08:51:41 PM

Finally got around to installing the LED kit on my king tour pak.  Turned out nice.  Smoke lens didn’t come with drilling template.  Had I know I would’ve went with red lens as it matches rear CVO tail lights. 

Does anyone know if smoke lens are available for the tail lights?
(https://uploads.tapatalk-cdn.com/20180629/4fa42c5f221a4f3661eba170cfd5dead.jpg)(https://uploads.tapatalk-cdn.com/20180629/d1414038ac5951f902371d0268052152.jpg)(https://uploads.tapatalk-cdn.com/20180629/9ffb66e5d33376ff0fe4af0822db85d2.jpg)


Sent from my iPhone using Tapatalk

Title: Re: King Tour Pak wraparound LED kit
Post by: Gandrtravis on July 02, 2018, 11:18:11 PM

Looks good I’m thinking of doing the same on mine. Wondering where you got the power for the tp and if there’s a quick plug you can take it off and hide the wire when detached? Any details would help me.

Title: King Tour Pak wraparound LED kit
Post by: GQ_Knuckle_Draggerz on July 03, 2018, 08:00:09 AM

Yep, Set up for quick detach.  Connects into tour pak with HD wiring harness part 69200131 which connects to bike via Namz tour pak power tap harness NTP-CB01.  Tucks away neatly when not in use


Sent from my iPhone using Tapatalk

Title: Re: King Tour Pak wraparound LED kit
Post by: Finnricd1 on July 30, 2018, 10:14:06 PM

Very nice, my tour pak is at the dealer (had a little damage on the latch).  When using the HD wiring harness and NAMZ NTP-CB01 do your turn signals also work?