Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [All]

Author Topic: Handlebar help  (Read 4269 times)

0 Members and 1 Guest are viewing this topic.

bigchuck

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 859
  • www.CVOHARLEY.com
    • TX


    • CVO1: 2015 Limited
Handlebar help
« on: January 09, 2019, 08:04:08 PM »

I'm looking at bars for my '15 CVO Limited. I'm 6'4" with a 34" inseam. I have a  stock hammock seat. I want to raise my hands so that they are even with the batwing fairing or partially above as in half of the grip above top edge of fairing would be ok. I also need them to pull back 2" or so. I like the look of the 10" Yaffe bars but read how they don't have much pullback. I will be staying with the stock heated grips. I will be doing the install myself. Any help or suggestions that would help me get this done right the first time be greatly appreated. This is will be the first time that I have had any bars other than stock on any bike. Thanks
Logged
2015 CVO Limited
Long Ride Shield
Fullsac dx w/2"cores, TTS tuned by Wolfgang
Super Shox

dayne66

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4037
    • BC


    • CVO1: '12 Ruby/Typhoon SG
    • CVO2: '15 Superior Blue FLD Switchback
Re: Handlebar help
« Reply #1 on: January 09, 2019, 08:16:22 PM »

have a look at Wild Ones bars......quite a variety and have improved hand position.
Logged
"The only true wisdom is in knowing you know nothing." Socrates

newseultra07

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 925
    • TX

Re: Handlebar help
« Reply #2 on: January 09, 2019, 08:42:25 PM »

Have a look at KST Kustoms Bars. Put a set of 12" on my 18 CVO Limited and really like them & the price is good also... I'm 6'4 with 32" Inseam...
Logged
2018 Anniversary CVO M8

bigchuck

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 859
  • www.CVOHARLEY.com
    • TX


    • CVO1: 2015 Limited
Re: Handlebar help
« Reply #3 on: January 09, 2019, 08:45:45 PM »

have a look at Wild Ones bars......quite a variety and have improved hand position.

Thanks. I have checked out most major brands. I'm looking for some real world feedback
Logged
2015 CVO Limited
Long Ride Shield
Fullsac dx w/2"cores, TTS tuned by Wolfgang
Super Shox

bigchuck

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 859
  • www.CVOHARLEY.com
    • TX


    • CVO1: 2015 Limited
Re: Handlebar help
« Reply #4 on: January 09, 2019, 08:50:04 PM »

Have a look at KST Kustoms Bars. Put a set of 12" on my 18 CVO Limited and really like them & the price is good also... I'm 6'4 with 32" Inseam...

Where are your hands in relation to fairing height wise? Did you pull them back towards you to straighten your back? Also what style did you get?
« Last Edit: January 09, 2019, 08:53:26 PM by bigchuck »
Logged
2015 CVO Limited
Long Ride Shield
Fullsac dx w/2"cores, TTS tuned by Wolfgang
Super Shox

newseultra07

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 925
    • TX

Re: Handlebar help
« Reply #5 on: January 09, 2019, 09:58:09 PM »

Where are your hands in relation to fairing height wise? Did you pull them back towards you to straighten your back? Also what style did you get?

Think I got the double mayhem bars.  My hands are pretty much to  top of fairing or little bit higher.  I did pull bars back some, could use a little more pull
Back but it’s a pain to take fairing off. So just gonna leave where they are.
Logged
2018 Anniversary CVO M8

bigchuck

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 859
  • www.CVOHARLEY.com
    • TX


    • CVO1: 2015 Limited
Re: Handlebar help
« Reply #6 on: January 09, 2019, 10:25:43 PM »

Think I got the double mayhem bars.  My hands are pretty much to  top of fairing or little bit higher.  I did pull bars back some, could use a little more pull
Back but it’s a pain to take fairing off. So just gonna leave where they are.

Thanks for the reply.
Logged
2015 CVO Limited
Long Ride Shield
Fullsac dx w/2"cores, TTS tuned by Wolfgang
Super Shox

newseultra07

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 925
    • TX

Re: Handlebar help
« Reply #7 on: January 09, 2019, 10:29:45 PM »

Thanks for the reply.

Believe I got the Mayhem bars.  Good luck in your search. 
Logged
2018 Anniversary CVO M8

DOCGSS

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 101
  • www.CVOHARLEY.com
    • MD


    • CVO1: 2020 CVO STREET GLIDE
Re: Handlebar help
« Reply #8 on: January 10, 2019, 08:58:58 AM »

I am 6'2" and experienced pain between my scapulae when I took a decent ride. I have a 2014 RK CVO. I put on the Wild Ones Reapers 14" and LOVE them. The pain is absolutely gone. In fact I have three bikes. I have a 2017 Triumph Bobber and placed the factory apes on as soon I I got them as the bars were way too low for me at my age especially. They were so comfortable, it was the inspiration for the Road King. The dealer placed another bar on first as the Wild Ones were backordered and I turned around and had them remove them and waited for the bars I wanted. I will never ride another touring or cruising bike again without these bars. Real world experience.
Logged

DOCGSS

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 101
  • www.CVOHARLEY.com
    • MD


    • CVO1: 2020 CVO STREET GLIDE
Re: Handlebar help
« Reply #9 on: January 10, 2019, 09:00:27 AM »

PS: This is NOT an inexpensive mod. Labor is about $1000
Logged

rayson56

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1831
  • Life's a journey not a destination.
    • WA


    • CVO1: 2018 FLTRXSE Black Earth/Vivid Black (Sold)
    • CVO2: 2011 FLHXSE2 Black Diamond (Traded)
    • CVO3: 2007 FXDSE Red (Sold)
Re: Handlebar help
« Reply #10 on: January 10, 2019, 11:26:05 AM »

I would highly recommend 12" Yaffe Monkey bars. I had them on my 11 Batwing. I'm 6'2" with 34" inseam and they worked perfectly and the wind over the faring comes just over the top of your hands so that they are not so exposed to the cold air in the winter months. They also have plenty of adjustment for pullback. You can start by lining them up with your forks and adjust them more towards you if necessary.
Logged
2010 Dyna Wide Glide
2021 GW Bagger
2018 SERG (Sold)
2011 SESG (Traded)
2007 Dyna Wide Glide CVO (Sold)
2010 Night Rod Special
2007 full custom road king
2006 big dog mastiff
2000 big dog pro 18
1999 big dog pro sport
1991 fxrs full custom
1984 v65 magna

bigchuck

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 859
  • www.CVOHARLEY.com
    • TX


    • CVO1: 2015 Limited
Re: Handlebar help
« Reply #11 on: January 10, 2019, 07:36:37 PM »

Thanks for the information guys. I think I will go around to dealerships and other places that have bikes and see if others will let me set on their bikes to see how they feel. My main dilemma is 10" or 12". I'm leaning towards 10" if they don't come down too much when I pull them back to me.
Logged
2015 CVO Limited
Long Ride Shield
Fullsac dx w/2"cores, TTS tuned by Wolfgang
Super Shox

newseultra07

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 925
    • TX

Re: Handlebar help
« Reply #12 on: January 10, 2019, 10:42:02 PM »

PS: This is NOT an inexpensive mod. Labor is about $1000


This is true if you let the dealer do the swap. I pulled the bars & wires out of old bars. Then took bars to a independent shop & they ran the wires inside bars for me for $75.00 then came back home & re installed bars.. It wasn't too bad except on the Limited bikes pretty much have to remove the fairing.  Total I have around $320.00 in the bars.. Dealer wanted over $700.. No thanx...
Logged
2018 Anniversary CVO M8

DOCGSS

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 101
  • www.CVOHARLEY.com
    • MD


    • CVO1: 2020 CVO STREET GLIDE
Re: Handlebar help
« Reply #13 on: January 11, 2019, 07:19:41 AM »

It is not just wires you need to run. Brake and clutch lines need to be changed. The risers should be changed out for heavy duty risers with apes. A new clamp with a second set of set screws should also be used to prevent rotation. This is a significant job.
Logged

GKroadking

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 295
  • www.CVOHARLEY.com


    • CVO1: CVO Road King 2014 (FLHRSE6) sold
    • CVO2: CVO Street Glide 2021 (FLHXSE)
Re: Handlebar help
« Reply #14 on: January 11, 2019, 08:43:52 AM »

....My main dilemma is 10" or 12". I'm leaning towards 10" if they don't come down too much when I pull them back to me.

Certainly, the 10" handlebar is too little difference to the original handlebar, which probably has about 9".
I guess you should go with the 12" handlebar.

 8)
Logged
CVO Street Glide 2021
FLHXSE
Sunset Orange & Sunset Black Fade
Jekill & Hyde Exhaust
http://jekillandhyde.com/en_US/our-technique
131cui

bigchuck

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 859
  • www.CVOHARLEY.com
    • TX


    • CVO1: 2015 Limited
Re: Handlebar help
« Reply #15 on: January 11, 2019, 10:26:09 AM »

Certainly, the 10" handlebar is too little difference to the original handlebar, which probably has about 9".
I guess you should go with the 12" handlebar.

 8)


Something to look into. Does anyone know what stock height is?
Logged
2015 CVO Limited
Long Ride Shield
Fullsac dx w/2"cores, TTS tuned by Wolfgang
Super Shox

dayne66

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4037
    • BC


    • CVO1: '12 Ruby/Typhoon SG
    • CVO2: '15 Superior Blue FLD Switchback
Re: Handlebar help
« Reply #16 on: January 11, 2019, 10:28:12 AM »

It is not just wires you need to run. Brake and clutch lines need to be changed. The risers should be changed out for heavy duty risers with apes. A new clamp with a second set of set screws should also be used to prevent rotation. This is a significant job.
With advice from here.....a few you-tube videos......one can certainly be more competent than most dealership hacks!
Logged
"The only true wisdom is in knowing you know nothing." Socrates

bigchuck

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 859
  • www.CVOHARLEY.com
    • TX


    • CVO1: 2015 Limited
Re: Handlebar help
« Reply #17 on: January 11, 2019, 10:39:59 AM »

I found this but it only goes up to 2013
« Last Edit: January 11, 2019, 11:03:47 AM by bigchuck »
Logged
2015 CVO Limited
Long Ride Shield
Fullsac dx w/2"cores, TTS tuned by Wolfgang
Super Shox

newseultra07

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 925
    • TX

Re: Handlebar help
« Reply #18 on: January 11, 2019, 01:27:51 PM »

I didn't have to extend brake or clutch cables when I went to 12" bars... If you go more than 12" you will have to extend the cables..
Logged
2018 Anniversary CVO M8

Mofo67

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 198
  • www.CVOHARLEY.com
    • NC

Re: Handlebar help
« Reply #19 on: January 13, 2019, 07:07:56 AM »

I’ve had both Wild One 10” and 12.5”. Really good fit and finish and both were very comfortable. The 10” my hands were just below the fairing and on the 12.5” just above it. One note with the 10” I felt I could maneuver better at low speeds. In both cases I was on a HD CVO Heated Hammock Seat.


Logged

Isy1

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
  • www.CVOHARLEY.com
    • NY

Re: Handlebar help
« Reply #20 on: January 14, 2019, 04:43:34 PM »

I agree, the diff between the stock and 10" is very little. I went for 12" Yaffe and could not be more happy with the set. I did it myself on older '14 Ultra Limited and it all went thru just fine except on one side i discovered i missed one wire and hell broke loose when i tried to pull the wires back up, etc.. when you have to worry about Heat Grips it adds an extra care (esp. when Yaffe design is not really curved like the Wild1 out there). Nevertheless, you can find very nice UTube video from a guy who did it on his SG - great video. If you need more info info you can PM me and do my best to help. My current CVO luckily already came with 14" and I almost cant tell the diff between this and the 12".
Hope this helps.
Logged

sabraitis

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
  • www.CVOHARLEY.com
    • ON


    • CVO1: 2018 CVO Ultra Limited
Re: Handlebar help
« Reply #21 on: January 20, 2019, 01:34:37 PM »

Have a look at KST Kustoms Bars. Put a set of 12" on my 18 CVO Limited and really like them & the price is good also... I'm 6'4 with 32" Inseam...

How do they interact with the stock mirrors?  I’m 6’1” with same inseam.  Looking at getting 10” bars but not sure.   Did you install yourself?
Logged
2018 CVO Ultra Limited
Rinehart exhaust & headers
HD Auto Tuner
Freedom Shield 9"
Biketronics 250w amp, Pro 7.1 speakers

newseultra07

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 925
    • TX

Re: Handlebar help
« Reply #22 on: January 21, 2019, 07:12:46 PM »

How do they interact with the stock mirrors?  I’m 6’1” with same inseam.  Looking at getting 10” bars but not sure.   Did you install yourself?

No problems with stock mirrors. Yes I installed bars myself. Removed wires from stock bars took to indy shop paid tech $75 to run wires internal. Only reason I have heated grips & didn't feel like messing with trying to run wires. Wasn't too bad doing the job. The Limited faring has to be removed completely thou...
Logged
2018 Anniversary CVO M8

Isy1

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
  • www.CVOHARLEY.com
    • NY

Re: Handlebar help
« Reply #23 on: January 24, 2019, 06:07:02 AM »

the fairing did not have to come off completely, you only need to release, lift it and let it rest diagonally. make sure to pad the front fender well. here's a great link to follow instructions:
https://rideitwrenchit.com/getting-new-bike-setup-2/

Logged

sabraitis

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
  • www.CVOHARLEY.com
    • ON


    • CVO1: 2018 CVO Ultra Limited
Re: Handlebar help
« Reply #24 on: February 05, 2019, 08:25:33 AM »

I'm removing the fairing for an amp and speaker upgrade.  Can't afford the dealer costs, but darn... you guys are making think to buy the bars and add this to the work effort. 
I'm thinking 12".
Logged
2018 CVO Ultra Limited
Rinehart exhaust & headers
HD Auto Tuner
Freedom Shield 9"
Biketronics 250w amp, Pro 7.1 speakers
Pages: 1 2 [All]
 

Page created in 0.201 seconds with 24 queries.