www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' Eagle® Electra Glide® => Topic started by: todd444 on April 04, 2010, 12:20:53 AM
-
hello all anyone know the part number for the fairing brackets mine broke :pumpkin:
-
you can fix lots of the broken inner fairing brackets yourself and they will be better than new,, there are several posts on here and it is a pretty easy job to do..HD does sell upgraded speaker brackets now that are alot better than the old ones.. You can ask for them at the parts counter anywhere,,, I did that.
-
Support inner fairing left: 58938-96b
Support inner fairing right 58939-96b
edited: ***
Also check the following if you are going to buy new vs. fix not sure which is the right ones.
Bracket, Fairing Support left 58478-96a
Bracket, Fairing Support Right 58479-96a
These numbers are from my 04 SEEG Parts book they may have been updated to a newer part number.
-
If yours broke in the place these most commonly break there are repairs you can do in place. The following pics aren't mine. They were better than anything I ever had so I downloaded them some time. Don't remember who gets the citation but they're good illustrations whomever they come from.
-
,
-
,
-
The little L brackets shown are something that can be had at places like Lowes, Home Depot or most hardware stores.
-
that's exactly where mine was broken also.. and the fix was pretty easy...
-
that's exactly where mine was broken also.. and the fix was pretty easy...
If they let go that seems far and away the most common spot. I've done that repair to at least a half dozen bikes. Oddly enough right now I can't remember if the red bike is one of them :nixweiss: ?
-
Link to other fix
http://www.cvoharley.com/smf/index.php?topic=47727.0
-
I would suggest repairing them yourself like in the pictures. Your repair will last longer and be cheaper.
-
I would suggest repairing them yourself like in the pictures. Your repair will last longer and be cheaper.
I agree, chances are the new ones are no better than the old ones and you won't have your bike down. If you want to fix your broken speaker brackets, take them to a talented local welder and have him tig them back together and add a 1/8 inch stiffener in the area that broke, problem will go away. Also recommend a cross brace above radio using the two existing holes in the factory bracket, you will not get any movement of the brackets again.
-
Thanks for your help guys!!
Todd444 did a great job repairing his on his own from your help!!!
This site rocks!!!
-
would anyone have the part # for the drain plug for the outer primary? it has a magnet and mine is stripped out. >:(
-
would anyone have the part # for the drain plug for the outer primary? it has a magnet and mine is stripped out. >:(
60391-04 Plug Assembly, drain, magnetic w/#11324
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
thank you..........
-
thank you..........
You're welcome. :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman: