Topic: Tour-Pak Paint Graphics (Read 14410 times)

jay · « **on:** December 03, 2003, 09:22:57 PM »

I am planning on putting a Tour-Pak on my FLHTCSE. From what I can tell in the accessories book and from the dealer, if I order a King Tour-Pak it will come in the FLHTCSE colors but not with any of the pinstripes. On the other hand if I get the Chopped Tour-Pak, it comes with the both the colors and the pinstripes. Anyone know if this is true!

I would like the King Tour-Pak and you would think for $850 they would pinstripe it!

JCZ · « **Reply #1 on:** December 03, 2003, 10:27:53 PM »

I'm not sure about the pin stripping, but I am going with the King Tour Pak anyway. I have an ice chest that fit in my tour pak on my Ultra Classic and I plan on using it again on the SEEG.

Besides, any good pin striper will do it for less than $50.

jay · « **Reply #2 on:** January 13, 2004, 09:59:17 PM »

I finally received my King Tour Pac today and, despite what I was told, it is all pin striped, has the flames, and looks great. All is well!

JCZ · « **Reply #3 on:** January 13, 2004, 11:03:20 PM »

Quote

I finally received my King Tour Pac today and, despite what I was told, it is all pin striped, has the flames, and looks great.

JCZ · « **Reply #4 on:** January 14, 2004, 01:58:03 PM »

Here's some flicks of the short tour pack.

JCZ · « **Reply #5 on:** January 14, 2004, 01:58:52 PM »

JCZ · « **Reply #6 on:** January 14, 2004, 01:59:29 PM »

JCZ · « **Reply #7 on:** January 14, 2004, 02:01:31 PM »

JCZ · « **Reply #8 on:** January 14, 2004, 02:03:09 PM »

Quote

I finally received my King Tour Pac today and, despite what I was told, it is all pin striped, has the flames, and looks great.

jay · « **Reply #9 on:** January 14, 2004, 09:13:39 PM »

Let's see if I can hit all the questions.

1) The king Tour Pac looks just like JCZ's #2 photo. It is black with the same stripes etc on the cover that are on that photo.

2) I am using the quick release set-up. My plan is to switch back and forth from the stock seat/sissybar set-up to the tour pac/touring seat depending on if I am just riding around local or on my long trips...or if my wife is along...she's the one who demaded the touring seat and the big armchair backrest on the tourpack!

3) I am using the comfort stitch seat from Harley. (The SERK uses the Road King version of that seat as we know.) I went with this seat because both my wife and I liked the seat on the '02 Ultra I had before this, I knew it would fit, and because the passenger portion of this seat is the widest I have found...not that my wife has a wide bottom!!! (She may read this by accident!)

4) I ordered the Tour Pac on 10/28/03 and it arrived on 1/9/04.

Finally, the King Tour Pac does not come with a lock. Apparently the short one does. I think the lock is about $10.

Finally, finally, I needed to get an antenna relocation kit as well in order to switch back and forth the way I mentioned before.

JCZ · « **Reply #10 on:** January 14, 2004, 10:10:29 PM »

Quote

2)

mr_magoo · « **Reply #11 on:** January 15, 2004, 08:26:31 AM »

Jay are you putting the back rest with the wrap around arms(aka ultra classic) if so let us now if you find a template to drill the extra hole for mounting, as I understand even the king tour-pak comes with the small backrest. Gotta keep em happy. [smiley=1syellow1.gif]

jay · « **Reply #12 on:** January 15, 2004, 12:22:40 PM »

My King Tour Pac came with no backrest at all. I did put the big armchair backrest on just like on my Ultra. The template came with the backrest.

JCZ · « **Reply #13 on:** January 15, 2004, 08:36:06 PM »

Quote

My King Tour Pac came with no backrest at all.

jay · « **Reply #14 on:** January 15, 2004, 09:36:14 PM »

If only it picked your nose and scratched your back...life would be complete! Good luck and thanks for all your work on this forum!

mr_magoo · « **Reply #15 on:** January 16, 2004, 08:32:41 AM »

Jay thanks for the info on the back rest thats what she wants [smiley=xyxthumbs.gif] lifes ruff keeping them happy.

JCZ · « **Reply #16 on:** January 18, 2004, 12:50:14 PM »

Quote

If only it picked your nose and scratched your back...life would be complete!

jay · « **Reply #17 on:** January 18, 2004, 08:30:16 PM »

One quick thought on this stuff we've been talking about...

I know that not all Harley seats fit if you put on the big armchair backrest on the tour pac, so I would suggest you check on that if you go with an aftermarket seat as well.

As I said, just a thought!

JCZ · « **Reply #18 on:** January 18, 2004, 11:10:59 PM »

Quote

One quick thought on this stuff we've been talking about...

I know that not all Harley seats fit if you put on the big armchair backrest on the tour pac, so I would suggest you check on that if you go with an aftermarket seat as well.

As I said, just a thought!

Corbin's seat is made specifically for this bike (the 04 SEEG) and it comes with the arm chair backrest.

JCZ · « **Reply #19 on:** February 02, 2004, 03:17:02 PM »

Just got my King Tour Pak and am very happy with what I see.

It is painted to match the cobalt blue and black including the pin stripe. I notice a big difference from the tour pak on my 01 Ultra Classic. All the hardware (latches, hinges, lock, side plates (where the side lights are on the Ultra Classic, along the bottom of the trunk) are all chrome plated! It did come with a lock and map pouch, also.

The quality of the paint and clear coat are very nice, no ridges over the pin striped areas. I ordered the liner for it, yesterday. I'm also thing about putting the spoiler wing on their with the LED running/brake light, but haven't decided on that, yet, for sure.

Cabo · « **Reply #20 on:** February 02, 2004, 04:34:53 PM »

You got your Tour Pack before the bike..that would depress me!

I am not getting a tour pack right away/ I got the full size removable backrest with the luggage rack attached. I have a t-bag that will hold almost as much stuff and when you get to where your going it all comes off easy (and my wife is comfortable also.

jay · « **Reply #21 on:** February 02, 2004, 04:52:30 PM »

Mine came with a map pouch as well, but no lock. I had to buy that separate! How do you rate!!! I'm jealous. Must be that "senior member" status vs my "newbie"!!

Just kidding. Glad it all worked out for you too!

JCZ · « **Reply #22 on:** February 02, 2004, 06:11:21 PM »

Quote

You got your Tour Pack before the bike..that would depress me!

mr_magoo · « **Reply #23 on:** February 02, 2004, 11:57:48 PM »

Congradulations JCZ now if you could just get the bike(ha ha)bet it looks good on the table [smiley=1syellow1.gif]. Am going to the shop tommorrow to order my Orange&Black tour pak & a few other items, then wait for the bike to show up.

Kingsalmon · « **Reply #24 on:** February 06, 2004, 07:25:22 PM »

Ok guys, its been a while since I've responded to the site but figured I'd let you know.
I just ordered the Tour pak, detachable mounting kit, antanna relocation kit, Corbin Dual Tour Seat w/heater, matching "small" passenger backrest, and rider backrest.
I ordered through Patty at Chicago HD. and got 20% off the Harley parts and 10% off the Corbin parts. Plus no state tax. shipping is still cheaper than the tax. 3 to 4 weeks for delivery.
Same old story, the old lady's butt got spoiled with the Ultra. [smiley=nixweiss.gif]

The Corbin seat has about 50 different styles (appearence) to choose from at no extra cost. And another 50 with added costs. Their web site shows it all.

The weather here on the west coast is suppose to be "spring like conditions" for the next few days. I can't wait. [smiley=bigok.gif]

rugbyprop · « **Reply #25 on:** February 07, 2004, 08:15:42 AM »

I am thinking of the chopped tour pak. has anyone seen any lower profile passenger backrests, with the armrests that would fit the chopped tour pak and still maintain the more chopped look? You know best of both type of thing. Trying to make everyne happy you know, and still have it my way

, any photos?

JCZ · « **Reply #26 on:** February 07, 2004, 12:31:58 PM »

Rugby in my homepage (click on the "homepage" icon at the top right of any page) there are some photos with the chopped tour pak on this bike. However, my understanding is that the arm chair type backrest is not compatable with the chopped tour pak.

Jackhd · « **Reply #27 on:** February 15, 2004, 03:31:42 PM »

Hi Guys, I am also thinking about getting a King Tour Pak . Do you know if the Detachable luggage rack 53107-96 on pg 354 will work. Jack

jay · « **Reply #28 on:** February 15, 2004, 05:37:04 PM »

Yep! That's the one I have on my SEEG with the King Tour Pac and works/fits fine!

starvin · « **Reply #29 on:** February 16, 2004, 08:24:08 AM »

Jack make sure you order the lock with it, I quess it's not included and my dealer said they had to order it so it would be keyed to my ignition key. They threw in the lock and installation for free so I wasn't about to question him.

Doc · « **Reply #30 on:** February 16, 2004, 10:58:12 AM »

Just in case anyone wondered...I have the Mustang pillow seat on my bike, and it fits great with the king tour pak. I also ordered the black spotted backrest, instead of the SEEG backrest pad. It looks better with the Mustang seat, and cost $100 less!!! Unbelievable.

JCZ · « **Reply #31 on:** February 16, 2004, 11:37:19 AM »

Quote

Just in case anyone wondered...I have the Mustang pillow seat on my bike, and it fits great with the king tour pak.

Doc · « **Reply #32 on:** February 16, 2004, 11:44:33 AM »

Oh my friend...I will post them soon. I have school tonight, but I will try on Tuesday.

Doc · « **Reply #33 on:** February 18, 2004, 09:17:45 AM »

Quote

Photos.....where's the photos?? [smiley=nixweiss.gif]

Doc · « **Reply #34 on:** February 18, 2004, 02:08:26 PM »

There ya go JCZ...sorry about bad quality...kinda dark in the garage.

Cabo · « **Reply #35 on:** February 18, 2004, 05:10:01 PM »

Wow, a snowblower with snow still on it...havent seen that for 10 years since I lived in the UT. MTs.

starvin · « **Reply #36 on:** February 18, 2004, 07:40:56 PM »

Quote

Wow, a snowblower with snow still on it...havent seen that for 10 years since I lived in the UT. MTs.

winters over, yesterday was our first day above freezing since Jan. 2 anyway thanks for the pics doc I was thinking of buying those saddle bag wing tips and now that i've seen them they'll be ordered by the end of the week.

JCZ · « **Reply #37 on:** February 18, 2004, 08:20:43 PM »

Thanks Doc, for the photo.....it was pretty clear on this monitor (had to buy a new one last week cuz I couldn't make out the photos).

My wife has already let me know that she wants the wrap around back rest like my Ultra Clssics had. So I'll be getting that style for when I have the trunk on.

What did you do with the holes in the tour pak? Or did you leave your antenna back there?

I like the wing tips, too. That is something that I was already considering and will definately go with them after seeing them on your bike. Thanks again Doc! [smiley=xyxthumbs.gif]

Doc · « **Reply #38 on:** February 19, 2004, 10:40:23 AM »

Haven't done anything yet with the holes...still waiting for a great idea to pop up. I would prefer not having them professionally filled/painted. No real desire to spend that much cash on such a small deal. Yes, I liked the wing tips too...thanks for noticing. I can't freaking wait for warmer weather, and rain to clean off some of this crappy salt dust. I'll post more pictures when I get a chance.

JCZ · « **Reply #39 on:** February 28, 2004, 12:40:28 PM »

Doc can we get some more pictures.....one from the back of the bike, full side shot, etc.? Thanks a bunch.

Doc · « **Reply #40 on:** March 02, 2004, 10:12:17 AM »

Quote

Doc can we get some more pictures.....one from the back of the bike, full side shot, etc.? Thanks a bunch.

For you guys??? Of Course! I'll try to make time tonight.

rugbyprop · « **Reply #41 on:** March 02, 2004, 10:33:19 AM »

Anyone got pictures of an orange tour pak yet??? Maybe I missed it, but I don't think I have seen one yet.

Black_Dog · « **Reply #42 on:** March 02, 2004, 02:17:01 PM »

Quote

Anyone got pictures of an orange tour pak yet??? Maybe I missed it, but I don't think I have seen one yet.

You need to go up there and check out your equipment, I think they started painting orange and black last week.

Black Dog

rugbyprop · « **Reply #43 on:** March 02, 2004, 03:04:06 PM »

You are right in that fact. Got a call from them today and they had a coil froze in a machine. They really wanted someone to come up this week and I will probably send someone else. Our shop manager is out due to a death in the family and I am covering for him through Friday. I probably won't make it up there anytime soon the way things are going. Thought if someone gets ahold of one prior to me seeing it live I would like to at least look at a photo.

Doc · « **Reply #44 on:** March 02, 2004, 07:47:36 PM »

Here's a few more of my ride...the red/blue glow are LED pods lighting up the chrome and engine...

Doc · « **Reply #45 on:** March 02, 2004, 07:51:20 PM »

Doc · « **Reply #46 on:** March 02, 2004, 07:52:42 PM »

Kingsalmon · « **Reply #47 on:** March 04, 2004, 01:08:30 PM »

Hey Doc I need some help.
I am assuming your tourpak is detachable. What part number did you use for the mounting bracket that attaches to the tourpak? I ordered the chopped tourpak and a "detachable tour pak bracket" part # 53107-96. This is not the right one.
thanks

Bikrtrsh · « **Reply #48 on:** March 04, 2004, 01:29:09 PM »

Uh-Oh! I ordered the same bracket for mine. What seems to be wrong with that tour pak rack? Did you get the docking hardware kits too? It appears to be right by looking in the catalog .............

Mark

Kingsalmon · « **Reply #49 on:** March 04, 2004, 01:41:37 PM »

Kind of hard to explain, but.
I am hoping I can use the same docking parts that come on the bike for the stock backrest. The bracket I ordered does not mount to the existing docks. The distance between the forward and rear dock on the bike is much further apart and the bracket is not adjustable.

Were you told that you had to change the docking posts on the bike as well?

thanks

Doc · « **Reply #50 on:** March 04, 2004, 01:56:30 PM »

Quote

Kind of hard to explain, but.
I am hoping I can use the same docking parts that come on the bike for the stock backrest. The bracket I ordered does not mount to the existing docks. The distance between the forward and rear dock on the bike is much further apart and the bracket is not adjustable.

Were you told that you had to change the docking posts on the bike as well?

thanks

Hey Kingsalmon...you need additional docking hardware to fit the bracket. Look in the Mo-Co book and you will see what you need. It's a cheap fix, and it will work.

Bikrtrsh · « **Reply #51 on:** March 04, 2004, 02:02:45 PM »

Yes sir. Unfortunately yes. The parts guy told me right down to the last nut and bolt (literally) what I'd have to get. Stupid me didn't write anything down either. Basicaly tho it's the docking kits, both front and rear. The tour pak rack and backrest. For the king tour pak you have to add the lock and assorted hardware.

I'm not aware of any tour pak mount that will work with the detachable backrest docking station. Sorry ... [smiley=nixweiss.gif]

Mark

Bikrtrsh · « **Reply #52 on:** March 04, 2004, 02:07:39 PM »

front and rear docking part #'s
53104-97A
53127-96B

About $50 total at your local dealer minus any discounts you may get.

Mark

Kingsalmon · « **Reply #53 on:** March 04, 2004, 02:18:47 PM »

How does the song go?

" I can see clearly now " silly me to think HD would make anything interchangeble for us.

thank guys for all the help.

Doc · « **Reply #54 on:** March 04, 2004, 02:29:20 PM »

Haha...very funny guys. There must be a a reason why they aren't interchangeable...

Oh yeah. It's $$$$. C'mon Kingsalmon. Post again. Leave your newbie status behind.

Kingsalmon · « **Reply #55 on:** March 04, 2004, 03:07:55 PM »

Wow this is like a promotion, out of the Newbie status.

Are you guys doing the mounting yourselves or having HD do it?

I'm pretty lazy but as you know, HD gets too much of my $$$$

mr_magoo · « **Reply #56 on:** March 23, 2004, 08:21:48 AM »

Just wanted to let everybody know that my Orange & Black tour-pak ordered on Feb 3 is at my dealer, and yes JCZ as soon as i can get there i will post pictures of it. Now all i need is the bike. [smiley=xyxthumbs.gif]

JCZ · « **Reply #57 on:** March 23, 2004, 12:18:33 PM »

Quote

front and rear docking part #'s
53104-97A
53127-96B

About $50 total at your local dealer minus any discounts you may get.

Mark

You do not need front docking hardware.....it's the same as your front docking hardware for the passenger backrest.

mr_magoo · « **Reply #58 on:** March 24, 2004, 08:16:55 AM »

False alarm got to the dealer and found all he had where saddlebag spoiler lights? [smiley=confused5.gif] Told them I did'nt order those, but had him unwrap one and took it out in the sun man is the pearl orange sweet. [smiley=thumbsup.gif]

JCZ · « **Reply #59 on:** March 24, 2004, 11:52:01 PM »

Quote

False alarm got to the dealer and found all he had where saddlebag spoiler lights?

Bikrtrsh · « **Reply #60 on:** March 25, 2004, 04:35:03 AM »

Yeah .... me too. I'm really looking forward to seeing your smiling face astride that orange SEEG! I bet that was one hell of a disappointment. So, outside of the color, what did you think of the spoilers? Thinking about a set for your SEEG?

JCZ, Do you just relocate the front docking station for the backrest to use for the tour pak? The dealer told me that it wouldn't work. I guess I'll be finding out in a couple of friggen months! I can't believe painted parts are that far out. [smiley=confused.gif]

Mark

mr_magoo · « **Reply #61 on:** March 25, 2004, 08:06:21 AM »

I was bummed, my wife wanted to kill the guy. [smiley=furious.gif] As for the saddlebag spoilers they look ok I guess, but I wash the bike every Friday and thought the wiring would be a hassle when taking the saddle bags on and off. Orange pearl in the light is way cool. Parts guy said he would sell'em cheap, I'll ask how much if anyone is interested. [smiley=beerchug.gif]

JCZ · « **Reply #62 on:** March 25, 2004, 09:26:06 AM »

Quote

Yeah .... me too. I'm really looking forward to seeing your smiling face astride that orange SEEG! I bet that was one hell of a disappointment. So, outside of the color, what did you think of the spoilers? Thinking about a set for your SEEG?

JCZ, Do you just relocate the front docking station for the backrest to use for the tour pak? The dealer told me that it wouldn't work. I guess I'll be finding out in a couple of friggen months! I can't believe painted parts are that far out.

Doc · « **Reply #63 on:** April 14, 2004, 11:31:46 AM »

Sooooo...what was the final tally on spoilers? If you have a detachable pak, and put on the brake light spoilers...is the wiring easy to detach to take the pak off?

jfscheck · « **Reply #64 on:** April 14, 2004, 02:14:30 PM »

I'll let ya know in one-two days... [smiley=7.gif]

h2oski · « **Reply #65 on:** April 14, 2004, 11:01:18 PM »

Well the wife just found out I didn't plan on ordering her a couch to rest against on the back of the bike.

Doc · « **Reply #66 on:** April 15, 2004, 01:02:46 PM »

Speaking of King Tour-paks.....has anyone found a good way of plugging the antenna mounting holes in the King-Pak??? I guess I'm looking for a pop-in rubber plug or something similar. I know we visited this topic before, but no one had yet found anything good for this. Thanks.

h2oski · « **Reply #67 on:** April 15, 2004, 03:06:10 PM »

Doc,
What about using a a button head fastener (see Picture)and nut with an o-ring under the head so you don't scratch the paint and seal out the water?

JCZ · « **Reply #68 on:** April 15, 2004, 04:29:01 PM »

Button head with chrome flat washer and nylon washer under that, is what I have. Not the best looking but it beats leaving a hole and nobody has commented on it.

I also thought about a short bolt from the inside, with the chrome acorn nut (no lock washer, just Locktight) on the outside.

JCZ · « **Reply #69 on:** April 15, 2004, 04:32:49 PM »

Quote

Well the wife just found out I didn't plan on ordering her a couch to rest against on the back of the bike.

Doc · « **Reply #70 on:** April 21, 2004, 03:56:59 PM »

Quote

Button head with chrome flat washer and nylon washer under that, is what I have. Not the best looking but it beats leaving a hole and nobody has commented on it.

I also thought about a short bolt from the inside, with the chrome acorn nut (no lock washer, just Locktight) on the outside.

Darn it all...I was kind of hoping for some sort of rubber plug that would have a flat side for the rear...grrrrr

Kingsalmon · « **Reply #71 on:** April 21, 2004, 04:13:18 PM »

Some kind of Rubber plugs do exists. I was at the local HD dealer and saw a SEEG with the chopped tour pack lid and rubber plugs that looked very clean. I just called and the guy in parts said he remembered the bike and they used the rubber bumper off the jiffy stand on a softtail part number 62123-66

This however does not make sense to me.
All I know for sure is I saw very clean looking flat plugs where the antenna relocation kit goes.

mr_magoo · « **Reply #72 on:** April 22, 2004, 08:30:37 AM »

Has anybody got an Orange & Black tour pak yet, [smiley=nixweiss.gif] if so when did you order it. Mine was ordered on the 7th of February and still not here. [smiley=brood.gif]

JCZ · « **Reply #73 on:** April 22, 2004, 09:37:11 AM »

Quote

Has anybody got an Orange & Black tour pak yet,

Doc · « **Reply #74 on:** April 22, 2004, 09:49:30 AM »

Quote

Some kind of Rubber plugs do exists. I was at the local HD dealer and saw a SEEG with the chopped tour pack lid and rubber plugs that looked very clean. I just called and the guy in parts said he remembered the bike and they used the rubber bumper off the jiffy stand on a softtail part number 62123-66

This however does not make sense to me.
All I know for sure is I saw very clean looking flat plugs where the antenna relocation kit goes.

This does not make sense to me either...but I really want to find something...thanks for the info. I'll keep looking.

rugbyprop · « **Reply #75 on:** April 22, 2004, 02:20:15 PM »

Quote

Has anybody got an Orange & Black tour pak yet,

jfscheck · « **Reply #76 on:** April 22, 2004, 02:59:39 PM »

Ordered my King Tour pack (orange and black) with my bike back in December, it arrived last week with my bike, and I have it home with me right now... [smiley=7.gif]

mr_magoo · « **Reply #77 on:** April 23, 2004, 08:38:17 AM »

Well I went by the dealer and he said it could be several more weeks till it shows up. [smiley=shocked2.gif]

mr_magoo · « **Reply #78 on:** May 05, 2004, 08:29:27 AM »

Got a call from the dealer yesterday and the tour pak is in. [smiley=beerchug.gif]

JCZ · « **Reply #79 on:** May 05, 2004, 09:24:50 AM »

Quote

Got a call from the dealer yesterday and the tour pak is in.

mr_magoo · « **Reply #80 on:** May 07, 2004, 08:28:59 AM »

Yah Yah will post the pic of it with the seat got most of it put together, tour pak, rack, spoiler, backrest. [smiley=1syellow1.gif]

mr_magoo · « **Reply #81 on:** May 09, 2004, 08:08:36 AM »

JCZ here is a pic of the tourpak

mr_magoo · « **Reply #82 on:** May 09, 2004, 08:19:31 AM »

You can kinda see the flames on the backrest in the last pic heres the seat. [smiley=1syellow1.gif]

JCZ · « **Reply #83 on:** May 09, 2004, 05:55:08 PM »

To quote somebody......"man, that's a lot of orange" [smiley=huepfenjump3.gif]

mr_magoo · « **Reply #84 on:** May 11, 2004, 08:36:26 AM »

Yeah thats alot of Orange, have talked to a few people and am thinking about adding some black and silver to the tour-pak and maybe HD in gold leaf (match the tank) [smiley=1syellow1.gif]

JCZ · « **Reply #85 on:** May 11, 2004, 10:07:10 AM »

It might be a little easier just to shrink the file down, before you post the photo. [smiley=nixweiss.gif] [smiley=laugh.gif]

mr_magoo · « **Reply #86 on:** May 11, 2004, 09:45:40 PM »

[smiley=shocked2.gif]Do what?

JCZ · « **Reply #87 on:** May 12, 2004, 01:36:28 AM »

Oh Magoo.....you dunnit again [smiley=huepfenjump3.gif]

mr_magoo · « **Reply #88 on:** August 02, 2004, 04:53:31 AM »

Just got the Tour Pak from the painter.

mr_magoo · « **Reply #89 on:** August 02, 2004, 04:55:09 AM »

One more try

roadrunner · « **Reply #90 on:** September 07, 2004, 10:42:25 PM »

did you install the arm rest seat on your tour pack? Did you have to drill holes to mount it? I am getting ready to install the arm rest on the tour pack. Thanks

mr_magoo · « **Reply #91 on:** September 08, 2004, 08:13:23 AM »

Yes you have to drill holes to mount the larger backrest, it should have come with a template for drilling the holes.

JCZ · « **Reply #92 on:** September 08, 2004, 12:46:57 PM »

Quote

did you install the arm rest seat on your tour pack?

JCZ · « **Reply #93 on:** September 08, 2004, 12:48:45 PM »

Quote

did you install the arm rest seat on your tour pack?

mr_magoo · « **Reply #94 on:** September 28, 2004, 08:17:19 AM »

Well hope it works now

mr_magoo · « **Reply #95 on:** September 28, 2004, 08:18:19 AM »

Well not sure why but the attachment is still deleted?

[smiley=nixweiss.gif]

JCZ · « **Reply #96 on:** September 28, 2004, 11:40:49 AM »

Quote

Well hope it works now

Naitram, do you know why this jpg doesn't show up?

mr_magoo · « **Reply #97 on:** September 28, 2004, 04:41:48 PM »

I'm at a loss the file is only 960kb. [smiley=shocked2.gif]

mr_magoo · « **Reply #98 on:** September 29, 2004, 08:13:31 AM »

JC did like you said and renamed the file.

mr_magoo · « **Reply #99 on:** September 29, 2004, 08:15:23 AM »

JC you da man it worked thank you oh wise one. Can't wait I have a whole bunch to post.

jfscheck · « **Reply #100 on:** September 30, 2004, 12:10:35 PM »

Looks great!

mr_magoo · « **Reply #101 on:** October 01, 2004, 08:30:23 AM »

Thaanks may not be the cheapest way to fill the antenna holes but looks better than bolts or plugs.

ccr · « **Reply #102 on:** January 19, 2005, 04:16:37 PM »

My husband removed his antenae from his tour pak, which left two holes. He filled them with a harley licence plate holder with the "Bar & Shield" Logo License Plate Hardware Kit. This chrome-plated hardware kit features white "Bar & Shield" logos, set off by a black background. Sold in sets of four, these 1/4"-20 x 3/4" fasteners include lock nuts and washers.

Twolanerider · « **Reply #103 on:** January 19, 2005, 05:32:41 PM »

Quote

My husband removed his antenae

That had to hurt......

(ok, so maybe I'll owe somebody dinner up in the Smokies...... [smiley=nixweiss.gif])

However.... Mrs. We, if you want to make a stab at color matching the plastic or rubber plugs you used Harley has a touch up paint kit for our red bikes. I did what you described with some plastic plugs from Home Depot to fill the holes on the chopped tour pak when I removed my own antenna. It's a base color/top color kit for the candy cherry and does a surprisingly good job.

I just walked out and looked at my touch up kit so as to give you the part number from it but it turns out the only number on the package is 94276. Not the right nomenclature for a normal HD part number. But speak with the parts counter at the dealership and they should be able to find the touch up paint kit available for the red bikes.

Author Topic: Tour-Pak Paint Graphics (Read 14410 times)

starvin

starvin