Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cowboy7123]

I notice you've got a Garmin GPS.  I'm expecting mine today or tomorrow.  How did you route the wirirng?

I've got a Battery tender and heated suit wired up atm - so I'm starting to worry about clearance for wiring up the GPS -

I let the dealer install the GPS and they went under the tank. Also you can buy a adapter to connect to your battery tender to run the heated suit. Just remove the 5 amp fuse from the tender hardness and replace it with a 15 amp fuse. The adapter cost around $7.00 ( this is what I did so I wouldn't have 2 wires hanging out )

[cowboy7123]

I'm partial to Springers but thats sharp, Did you SERT it with the pipes!

I did the SERT and Dyno, The bike runs great. The pipes are SE slip-on, IF anyone is looking for LOUD pipes do not buy these. But they are alitte bit louder and sound better then the stock POS........  I'm getting to old for loud pipes and thats why I went with the SE..............  The Dealer told me I didnt have to do the SERT with these pipes but I had them do it anyways because I wanted it fine tuned on the dyno.

[cowboy7123]

Looks good, Cowboy, cleeeeeeen.  you have a p/n on the heel rests in your pix? I cant find them in my catalog.

I'm thinkin reverse mount for mini hiway footing, in front of the pegs, under and out from pedals.

PAGE 188   Part # 50227-01   
PAGE 575   Part # 34720-07

They make a big differents in the ride.

[dirtyoldman]

thanks bunches  cowboy, parts on order,,,

 along w/bags, and flush caps, and a few 'skull' trim pieces. windshield is on, but am going to try to put a darker 'smoke' over the bottom half to cover the triple tree chrome. Cant wait to get it all together and post new pics.

[cowboy7123]

thanks bunches  cowboy, parts on order,,,

 along w/bags, and flush caps, and a few 'skull' trim pieces. windshield is on, but am going to try to put a darker 'smoke' over the bottom half to cover the triple tree chrome. Cant wait to get it all together and post new pics.

what bags are you putting on?

[dirtyoldman]

going with the permanent lockable HD bags on docking pegs. The plan now is a solo seat, locking bags, and either a large detachable rack (i'd have to fab) or if I can make the small HD rack fit (pg 147 / G ). Still doing research on that. The FXDF & SE  about 1/2" wider than stock, I'd prefer bigger bags,, but it IS a FXD, not a bagger.  and they LOCK! Mebbe just stock HD docking plates and HD sissy bar rack w/ stock seat. 

Bottom line is a place for a LARGE bag strapped laying down on the seat, NOT stickin straight up strapped to a sissy bar.

will post pics when it's buttoned up

oh, btw, ordered the heel rests, but am going to try to mount forward of the pegs (reversed - left on right etc) to have heel rests forward. I got looooong legs but can't stand "feet way up" h'way pegs.