Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: Just got my Corbin solo seat  (Read 6456 times)

0 Members and 1 Guest are viewing this topic.

spook120

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 428
Just got my Corbin solo seat
« on: March 14, 2017, 06:22:20 PM »

Just got my Corbin solo seat. Noted it said for 09 street glide. Called Corbin and they said all the same up to 2017. My 2017 is waiting at dealer for winter to leave but was wondering if I got the correct seat?  Also any issues in mounting the seat to the CVO street glide? Thanks in advance.
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23519
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: Just got my Corbin solo seat
« Reply #1 on: March 14, 2017, 06:46:46 PM »

You did order for the "CVO" Street Glide correct?  It is a bit different than the regular SG.  I've posted on this forum several times to order from Jim (hd-dude on this forum and owner of Metal Dragon in Hayward) to make sure you get the right seat for the right CVO and to get the discount.

If you end up with the wrong seat, I'd suggest that you call Corbin in Hollister (that's where all the seats are made, not in Fla.) and ask for Julio (pronounced Hulio).  He is the lead guy in the shop and knows the difference between a CVO SG and a regular SG.

Here's a link to mine being made for my 10 CVO SG.....excellent customer service if you can ride in.  Over the phone.....not so much.....   https://www.cvoharley.com/smf/index.php?topic=40248.30

If you want to spend the time going through all 49 pages of that thread you'll find many, many mods to a CVO SG but I warn you........it will cost you $$ before you're through the entire thread.   :P

Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

spook120

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 428
Re: Just got my Corbin solo seat
« Reply #2 on: March 14, 2017, 06:53:41 PM »

Told them a CVO bike but doubt they listened. What's the difference in seats?
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23519
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: Just got my Corbin solo seat
« Reply #3 on: March 14, 2017, 06:57:49 PM »

If I remember correctly (that was 8 yrs. ago).....it's the tongue.  Up around where the seat fits around the tank and the bottom part of the tank dash.   I've had a few seats made at Corbin for different bikes so can't say with certainty. 

Are you able to take it to your dealership and have them try it?
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

spook120

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 428
Re: Just got my Corbin solo seat
« Reply #4 on: March 14, 2017, 07:09:27 PM »

Well I guess I will be on the phone to Corbin tomorrow...but after hearing horror stories about their customer service it is not something I am looking forward to doing.  Worse case scenario if it is the wrong seat and they give me crap, I will stop payment on my credit card. Should have just left the bloody bike stock!  Ugh.
Logged

spook120

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 428
Re: Just got my Corbin solo seat
« Reply #5 on: March 14, 2017, 07:40:39 PM »

So just spent some time on the Corbin site again...they mentioned under tech crap that the classic solo will not fit the CVO unless you remove the "decorative strips" on the rear fender...  Is that true if you don't use the pillion portion also?  I am not a happy camper. 
Logged

EmptyNapalm

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
  • www.CVOHARLEY.com
    • NH

    • CVO1: 2017 CVO Street Glide® Starfire Black with Atomic Red
Re: Just got my Corbin solo seat
« Reply #6 on: March 14, 2017, 07:51:21 PM »

You should be alright with the solo.  I put the Corbin solo tour which has a rear seat attached, and I had to remove those pieces, but they're just stuck on the fender.  I can go back to the stock seat and just re-stick those pieces back on.  If yours is just a solo seat it should stop before those pieces.
Logged

spook120

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 428
Re: Just got my Corbin solo seat
« Reply #7 on: March 14, 2017, 07:55:25 PM »

Hope so.  As I said, bike is still at dealer so I have not had a chance to try the seat fitment.  Hopefully I am getting upset for nothing.  Just don't like hassle at this stage of my existence. Thanks for the reply.
Logged

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6748

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: Just got my Corbin solo seat
« Reply #8 on: March 14, 2017, 08:30:34 PM »

So just spent some time on the Corbin site again...they mentioned under tech crap that the classic solo will not fit the CVO unless you remove the "decorative strips" on the rear fender...  Is that true if you don't use the pillion portion also?  I am not a happy camper.

It said that about the strips on my '15 and it fits just fine with them. I even use the P-pad and install it on top of the strips--No issues
Logged

spook120

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 428
Re: Just got my Corbin solo seat
« Reply #9 on: March 14, 2017, 09:08:51 PM »

Thanks all for the replies and advice.  I will call Corbin tomorrow to see if there is a unique CVO application for the solo seat.  Appreciate your wisdom.
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23519
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: Just got my Corbin solo seat
« Reply #10 on: March 14, 2017, 09:58:25 PM »

Most of the people that answer the phone are not going to know the difference between a CVO SG and a regular SG......ask for Julio.

Did you order directly from Corbin or from some other retailer?
« Last Edit: March 14, 2017, 10:02:27 PM by JCZ »
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

spook120

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 428
Re: Just got my Corbin solo seat
« Reply #11 on: March 14, 2017, 10:00:05 PM »

Will do. Thanks
Logged

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: Just got my Corbin solo seat
« Reply #12 on: March 15, 2017, 07:14:18 AM »

Hope so.  As I said, bike is still at dealer so I have not had a chance to try the seat fitment.  Hopefully I am getting upset for nothing.  Just don't like hassle at this stage of my existence. Thanks for the reply.

It said that about the strips on my '15 and it fits just fine with them. I even use the P-pad and install it on top of the strips--No issues

Corbin says it won't fit, but it does.

Frames are the same from 2009 to 2017, so if it fits a 09 it fits a 17.  I ran the corbin solo on my 12 CVO Road Glide, then my 13 CVO King for a bit.  Both have those strips on the fender with the black rubber.  Then I ran it on my 15 CVO Road Glide ultra for a couple years.  I added the two fender strips with the chrome and rubber for that bike as I liked the look.

The seat my contact the edge of the rubber, but it will not hurt.  If you worry about that carefully remove the fender strips and move them back an 1/4 inch and there will be no contact.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

D-N-D

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6711
  • FLHRSEI.ORG
    • PA


    • CVO1: 2020 FLHTKSE Limited / Moonlight Blue & Deep Sea Blue
Re: Just got my Corbin solo seat
« Reply #13 on: March 15, 2017, 09:30:56 AM »

You will not need to remove the strips it will fit fine !!!

Dante
Logged
DND

spook120

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 428
Re: Just got my Corbin solo seat
« Reply #14 on: March 15, 2017, 10:42:27 AM »

Good to know.  Now have to see if I got the correct seat when I call Corbin this AM. I will let the board know what I find out...good or bad.  And It is actually my bad for not doing more research before the purchase and being more insistent about being for a CVO bike.  One way or the other it will get resolved, just depends on how much hassle it will be to get it right. Thanks for the replies and information.  Appreciate it.
Logged
Pages: [1] 2  All
 

Page created in 0.161 seconds with 24 queries.