Topic: Woohoo!! (Read 2686 times)

Eqcons · « **on:** February 28, 2006, 11:15:26 AM »

Just heard that my CUSE has a build date of tomorrow and I should have it by the end of March! How will I be able to sleep between now and then? [smiley=banana.gif]

Jim

UK Dave · « **Reply #1 on:** February 28, 2006, 11:22:12 AM »

Alcohol!!

Cheers [smiley=drink.gif]

Dave

RJ749 · « **Reply #2 on:** February 28, 2006, 11:31:58 AM »

Congrats, may as well start buying chrome now.

Eqcons · « **Reply #3 on:** February 28, 2006, 11:53:45 AM »

Quote

Congrats, may as well start buying chrome now.

I've got the list prepared....

Screamin_Beagle · « **Reply #4 on:** February 28, 2006, 12:01:04 PM »

When I got the build date for mine, I kept two things next to my bed, a bottle of scotch and a 2.5lb dead blow rubber mallet. If you get your timing right (between the time you drink the scotch, and hit yourself as hard as you can in the forehead with the deadblow), you don't even feel it. Of course, you better stock up on asprin and bandaides too, the next morning sucks!!!

_Beagle

Eqcons · « **Reply #5 on:** February 28, 2006, 12:07:00 PM »

Quote

When I got the build date for mine,

GC_Super · « **Reply #6 on:** February 28, 2006, 01:02:41 PM »

I just got through an almost 7 month wait, and I'm not known for my patience. Really, it wasn't that bad. Didn't have any trouble sleeping, although it was on my mind a lot. Actually, the last day was going to be the worst, as it was scheduled to be ready late in the afternoon on a Tuesday, so I had planned to pick it up the next day. But, they called me at 9:30 that Tuesday AM and said "it's ready!

Eqcons · « **Reply #7 on:** February 28, 2006, 01:12:08 PM »

Quote

I just got through an almost 7 month wait, and I'm not known for my patience. Really, it wasn't that bad. Didn't have any trouble sleeping, although it was on my mind a lot. Actually, the last day was going to be the worst, as it was scheduled to be ready late in the afternoon on a Tuesday, so I had planned to pick it up the next day. But, they called me at 9:30 that Tuesday AM and said "it's ready!

cigarmike · « **Reply #8 on:** February 28, 2006, 02:24:31 PM »

which one did you get??, the Haze?, I'll bet you cant wait. Have fun

Eqcons · « **Reply #9 on:** February 28, 2006, 02:33:06 PM »

Quote

which one did you get??, the Haze?, I'll bet you cant wait. Have fun

Yes, the Haze, Cigarmike!

Jim

cigarmike · « **Reply #10 on:** February 28, 2006, 03:34:03 PM »

Nice , nice nice.

Id be a wreck if I ordered a Black one and had to wait after knowing bout the paint. Wanna trade??.

Boatman · « **Reply #11 on:** February 28, 2006, 04:20:40 PM »

Congrats on the build date. We'll help the time go by fast (and spend your money on goodies).

Fired00d · « **Reply #12 on:** February 28, 2006, 04:55:42 PM »

Quote

Congrats on the build date.

Eqcons · « **Reply #13 on:** February 28, 2006, 06:24:14 PM »

Oh, I've already combed the P&A catalogue, (Whaddaya think has kept me sane these last months?)

and I have my list.

Eqcons · « **Reply #14 on:** February 28, 2006, 06:34:29 PM »

Quote

Nice , nice nice.

Fired00d · « **Reply #15 on:** February 28, 2006, 06:50:41 PM »

Quote

......Rear Fender Medallion (we don't get that on the UK bikes - anyone know the part #???).......

Jim

If you are speaking of the Cloisonne, rear fender (chrome and black) P/N 59423-03 (this is the part number from my 2004 SEEG Parts Catalog) Which can be seen on this thread/post. I believe this may be a protected part, if I remember correctly many have tried to get this for the 2005 SEEG and haven't been able to get them. [smiley=nixweiss.gif] Good luck.

[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]

mr_magoo · « **Reply #16 on:** February 28, 2006, 10:18:56 PM »

Woohoo is right your going to load that baby with some Bling Bling. [smiley=xyxthumbs.gif]

Eqcons · « **Reply #17 on:** March 01, 2006, 09:57:17 AM »

Quote

If you are speaking of the Cloisonne, rear fender (chrome and black) P/N 59423-03 (this is the part number from my 2004 SEEG Parts Catalog) Which can be seen on this thread/post. I believe this may be a protected part, if I remember correctly many have tried to get this for the 2005 SEEG and haven't been able to get them. [smiley=nixweiss.gif] Good luck.

[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]

Hmmm..... I sort of suspected that. Of course it *should* be orderable using the VIN number off my bike (when it comes!) or of course the MoFoMoCo may not accept HDI orders for it even from genuine SE bike owners.....

So, if it turns out that it really IS a protected part, perhaps there is a US located 06 CUSE owner on the site who would be kind enough to order one for me....? Any volunteers?

Jim

Eqcons · « **Reply #18 on:** March 01, 2006, 09:58:42 AM »

Quote

Woohoo is right your going to load that baby with some Bling Bling.

Eqcons · « **Reply #19 on:** March 01, 2006, 10:05:41 AM »

Quote

many have tried to get this for the 2005 SEEG and haven't been able to get them. [smiley=nixweiss.gif] Good luck.

[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]

What was fitted to the 05 SEEG instead Firedood?

Jim

GC_Super · « **Reply #20 on:** March 01, 2006, 10:34:35 AM »

Quote

Oh, I've already combed the P&A catalogue, (Whaddaya think has kept me sane these last months?)

RJ749 · « **Reply #21 on:** March 01, 2006, 10:51:16 AM »

Quote

Oh, I've already combed the P&A catalogue, (Whaddaya think has kept me sane these last months?)

Eqcons · « **Reply #22 on:** March 01, 2006, 01:10:08 PM »

Quote

It's the little chit that drives me nuts.....I wish just the logical stuff would be at least standard on our CVO's....

Ordered mine today, thanks Eqcons...I think!

naitram · « **Reply #23 on:** March 01, 2006, 01:13:01 PM »

Quote

It's the little chit that drives me nuts.....I wish just the logical stuff would be at least standard on our CVO's....

Ordered mine today, thanks Eqcons...I think!

Eqcons · « **Reply #24 on:** March 01, 2006, 01:13:44 PM »

Quote

Damn, and I thought these bikes came with everything possible.

RJ749 · « **Reply #25 on:** March 01, 2006, 01:21:06 PM »

Quote

is that going to work withe the SEUltra seat? a regular heated seat is a single zone and has a plug under the seat for the indicator. the SEUltar seat has 2 zones

I guess I'll be checkin' on that and report back....thanks for the heads up

naitram · « **Reply #26 on:** March 01, 2006, 01:26:59 PM »

also the indactor mounts in an ACC switch housing which will only work with 1 inch diameter bars, and wer never intended to be wired internally, but if you want to see whats involved in making it internal check here

http://flhrsei.org/gallery/project_spring_05

thers 6 or 7 pics that will give you an idea of how i made them internally wired

Eqcons · « **Reply #27 on:** March 01, 2006, 01:35:52 PM »

Quote

I guess I'll be checkin' on that and report back....thanks for the heads up

Yes, that was well spotted by Naitram - look forward to hearing what you discover, RJOB!

Jim

naitram · « **Reply #28 on:** March 01, 2006, 01:37:21 PM »

i'd hate to see one of you dump $$$$ into parts that you cant use or even mount to your bike

Eqcons · « **Reply #29 on:** March 01, 2006, 01:53:18 PM »

Quote

i'd hate to see one of you dump $$$$ into parts that you cant use or even mount to your bike

Appreciated, Naitram!

(Course they can always be sold on ebay for more than you pay for them......)

Jim

PCC · « **Reply #30 on:** March 01, 2006, 02:40:48 PM »

Eqcons:

A liitle bird told me that Brad at Freedom has some new stuff about ready to bust out. You might want to give him a call and converse. Especially if your planning on the end of March.
8-)

Eqcons · « **Reply #31 on:** March 01, 2006, 02:47:22 PM »

Quote

Eqcons:

A liitle bird told me that Brad at Freedom has some new stuff about ready to bust out. You might want to give him a call and converse. Especially if your planning on the end of March.
8-)

Now that DOES sound interesting!

RJ749 · « **Reply #32 on:** March 01, 2006, 04:52:27 PM »

Quote

i'd hate to see one of you dump $$$$ into parts that you cant use or even mount to your bike

Dang and I thought we had found another hole to poor some dough into.

Author Topic: Woohoo!! (Read 2686 times)

cigarmike

cigarmike