Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Fired00d]

......Rear Fender Medallion (we don't get that on the UK bikes - anyone know the part #???).......

Jim

If you are speaking of the Cloisonne, rear fender (chrome and black) P/N 59423-03 (this is the part number from my 2004 SEEG Parts Catalog) Which can be seen on this thread/post. I believe this may be a protected part, if I remember correctly many have tried to get this for the 2005 SEEG and haven't been able to get them. [smiley=nixweiss.gif] Good luck.

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

[mr_magoo]

Woohoo is right your going to load that baby with some Bling Bling.  [smiley=xyxthumbs.gif]

[Eqcons]

If you are speaking of the Cloisonne, rear fender (chrome and black) P/N 59423-03 (this is the part number from my 2004 SEEG Parts Catalog) Which can be seen on this thread/post. I believe this may be a protected part, if I remember correctly many have tried to get this for the 2005 SEEG and haven't been able to get them. [smiley=nixweiss.gif] Good luck.

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

Hmmm..... I sort of suspected that.  Of course it *should* be orderable using the VIN number off my bike (when it comes!) or of course the MoFoMoCo may not accept HDI orders for it even from genuine SE bike owners.....

So, if it turns out that it really IS a protected part, perhaps there is a US located 06 CUSE owner on the site who would be kind enough to order one for me....? Any volunteers?  

Jim

[Eqcons]

Woohoo is right your going to load that baby with some Bling Bling.

[Eqcons]

many have tried to get this for the 2005 SEEG and haven't been able to get them. [smiley=nixweiss.gif] Good luck.

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

What was fitted to the 05 SEEG instead Firedood?

Jim

[GC_Super]

Oh, I've already combed the P&A catalogue, (Whaddaya think has kept me sane these last months?)

[RJ749]

Oh, I've already combed the P&A catalogue, (Whaddaya think has kept me sane these last months?)

[Eqcons]

It's the little chit that drives me nuts.....I wish just the logical stuff would be at least standard on our CVO's....

Ordered mine today, thanks Eqcons...I think!

[naitram]

It's the little chit that drives me nuts.....I wish just the logical stuff would be at least standard on our CVO's....

Ordered mine today, thanks Eqcons...I think!

[Eqcons]

Damn, and I thought these bikes came with everything possible.

[RJ749]

is that going to work withe the SEUltra seat? a regular heated seat is a single zone and has a plug under the seat for the indicator. the SEUltar seat has 2 zones

I guess I'll be checkin' on that and report back....thanks for the heads up

[naitram]

also the indactor mounts in an ACC switch housing which will only work with 1 inch diameter bars, and wer never intended to be wired internally, but if you want to see whats involved in making it internal check here

http://flhrsei.org/gallery/project_spring_05

thers 6 or 7 pics that will give you an idea of how i made them internally wired

[Eqcons]

I guess I'll be checkin' on that and report back....thanks for the heads up

Yes, that was well spotted by Naitram - look forward to hearing what you discover, RJOB!

Jim

[naitram]

i'd hate to see one of you dump $$$$ into parts that you cant use or even mount to your bike

[Eqcons]

i'd hate to see one of you dump $$$$ into parts that you cant use or even mount to your bike

Appreciated, Naitram!     (Course they can always be sold on ebay for more than you pay for them......)

Jim