Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bigskyroadglide]

What are you guys with '13 CVO Road Glides doing about the stock bars and risers being 1 1/4"  and most aftermarket bars are reduced to 1" in the mounting area?

this

http://shop.wild1inc.com/WO806-125-RISER-ADAPTER-WO806.htm

[ImBroke]

thanks for the link, that should do the trick

[donvito]

I just went to the Buky site, please tell me that its a misprint. The 10"Malo 1-1/2" bars weigh 67 pounds???

[GregKhougaz]

I just went to the Buky site, please tell me that its a misprint. The 10"Malo 1-1/2" bars weigh 67 pounds???

Not possible.  6 "point" 7 pounds more likely. 

[donvito]

Greg thats what I thought to, but on their site all the bars weigh 67lbs 10" or 20" all weigh the same lol. I guess they dont have a proof reader

[GregKhougaz]

Greg thats what I thought to, but on their site all the bars weigh 67lbs 10" or 20" all weigh the same lol. I guess they dont have a proof reader

Neither do we.         

[donvito]

KST kustoms 12" mayhems , no wires , no hoses , no new clamp needed

Did you have any issues feeding the wires through those welded corners? It looks to be a little simpler than trying to go through Yaffe bagger bars.

[fastfreddy]

Did you have any issues feeding the wires through those welded corners? It looks to be a little simpler than trying to go through Yaffe bagger bars.

i had them installed, so i cant say. i dropped it off @ 6pm and picked it up @ 3pm the next day so i would say they didnt have to much trouble.